Effect of Scanning Electron Beam Pretreatment on Gas Carburization of 22CrMoH Gear Steel
Open Access
Abstract
22CrMoH was selected for the gear steel material in this work, and the temperature field change in the scanning electron beam was analyzed to determine the optimal scanning parameters and explored the effect of scanning electron beam pretreatment (Abbreviated as: SEBP) on gas-carburizing (GC) efficiency and organizational properties of gear steel. The results showed that the scanning electron beam caused the material to form a thermally deformed layer 110 μm thick, and it promoted the adsorption of carbon atoms on the surface and their inward diffusion. Under the same gas-carburizing conditions, the carburizing efficiency was improved, and the thickness of the carburized layer increased from 0.78 to 1.09 mm. Furthermore, the hardness of the GC specimens with the SEBP increased from 615 to 638 HV0.05 at 0.1 mm of the sample surface, whereas the hardness of the cross-sectional region decreased gradually, indicating that the scanning electron beam enhanced the adhesion between the carburized layer and matrix zone. A comparative analysis of the microstructures of the GC specimens with and without the SEBP showed that the carbide particles in the surface layer of the samples become smaller and that of volume fraction of residual austenite reduced in size. In terms of the mechanical properties, the surface friction coefficient decreased from 0.87 to 0.46 μ and the GC specimen with the SEBP had a higher cross-sectional hardness gradient. In this way, the amount of wear was reduced from 1.07 to 0.51 mg, which was only 47.7% of the amount of wear of the matrix specimen.Keywords
Funding Information
- Guangxi science and technology project key research and development project (GUIKE AB24010208, 2021GXNSFBA196038, 23354S012, 2022MD713742, 2022M710920, 20220106-1)
- Natural Science Foundation of Guangxi Zhuang Autonomous Region (GUIKE AB24010208, 2021GXNSFBA196038, 23354S012, 2022MD713742, 2022M710920, 20220106-1)
- Guangxi Key Laboratory of Manufacturing System & Advanced Manufacturing Technology (GUIKE AB24010208, 2021GXNSFBA196038, 23354S012, 2022MD713742, 2022M710920, 20220106-1)
- China Postdoctoral Science Foundation (GUIKE AB24010208, 2021GXNSFBA196038, 23354S012, 2022MD713742, 2022M710920, 20220106-1)
- Key Research and Development Projects of Guilin City (GUIKE AB24010208, 2021GXNSFBA196038, 23354S012, 2022MD713742, 2022M710920, 20220106-1)
This publication has 35 references indexed in Scilit:
- Influence of carbon layer hardness characteristics on RCF performance of carburized bearing steel and optimization of heat treatment processEngineering Failure Analysis, 2024
- Mechanical properties characterization of Ti-6Al-4 V grade 5 (recycled) additively manufactured by selective electron beam melting (EB-PBF)Engineering Failure Analysis, 2023
- Characterization of carburized layer on low-alloy steel fabricated by hydrogen-free carburizing process using carbon ionsDiamond and Related Materials, 2023
- On the role of chemical banding and austenite grain size in microstructure evolutions and phase transformation kinetics of gear steelsConstruction and Building Materials, 2022
- The role of defects and characterisation of tensile behaviour of EBM Additive manufactured Ti-6Al-4V: An experimental study at elevated temperatureEngineering Failure Analysis, 2021
- High cycle fatigue behavior of a low carbon alloy steel: The influence of vacuum carburizing treatmentEngineering Failure Analysis, 2020
- The enhancement effect of salt bath preoxidation on salt bath nitriding for AISI 1045 steelApplied Surface Science, 2019
- Carburising of Low-Carbon Steel Using Carbon Black NanoparticlesArabian Journal for Science and Engineering, 2016
- Surface modification of the metal plates using continuous electron beam process (CEBP)Applied Surface Science, 2014
- Surface modification of the patterned Al6061/SUS304 metal plates using the large electron beamApplied Surface Science, 2012