Dissipate and Recentre (D&R) experimental campaign on real scale GFRP composite frame structures: data set
Open Access
- 14 January 2026
- journal article
- data note
- Published by CERN in Open Research Europe
- Vol. 5, 308
Abstract
In the scope of the Dissipate&Recentre project, which was granted access to the ELSA Reaction Wall of the Joint Research Centre physical research infrastructure of the European Commission, large scale composite frame structures were tested under lateral loading. The test specimens, comprising pultruded glass fibre reinforced polymer (GFRP) profiles, connected with stainless steel elements, had two longitudinal (test direction) bays, two storeys and a shorter transverse bay. Concrete slabs were provided as flooring system, simulating a quasi-permanent load level – as that used in seismic design. A total of 4 full-scale specimens were tested, two including a bracing system, also comprising pultruded GFRP profiles, and two without bracings. For each configuration, one specimen was tested under monotonic loading and the other under cyclic loading. The aim of this paper is to disseminate the experimental data obtained in these tests. To that end, the experimental campaign is thoroughly described, including all the relevant details of the test specimens, the construction process, the setup and instrumentation, and the test programme. Additionally, a brief description of the test observations is also provided. The test results showed that the structural integrity of these GFRP frames was maintained up to 2% inter-storey drifts, for both braced and unbraced configurations, presenting very limited damage. These results indicate that GFRP frame structures may be designed to withstand significant seismic actions.Keywords
Funding Information
- Foundation for Science and Technology (10.54499/UIDB/50022/2020)
- Foundation for Science and Technology (10.5449/UIDB/04625/2020)
- Foundation for Science and Technology (2023.06116.CEECIND/CP2859/CT0001)
- Directorate-General Joint Research Centre (36506-2/2021-1-RD-ELSA-ReactionWall)
This publication has 10 references indexed in Scilit:
- Seismic Response of Three-Dimensional Pultruded GFRP FramesJournal of Composites for Construction, 2024
- Monotonic and cyclic sway behaviour of 2-dimensional frames made of pultruded GFRP I-section profilesStructures, 2023
- Monotonic and cyclic behaviour of a stainless steel cuff system for beam-to-column connections between pultruded I-section GFRP profilesEngineering Structures, 2021
- Ethernet-Based Servo-Hydraulic Real-Time Controller and DAQ at ELSA for Large Scale ExperimentsJournal of Earthquake Engineering, 2021
- Monotonic and cyclic behaviour of cuff beam-to-column connection system for tubular pultruded GFRP profilesEngineering Structures, 2021
- Exterior beam-to-column bolted connections between GFRP I-shaped pultruded profiles using stainless steel cleats. Part 1: Experimental studyThin-Walled Structures, 2021
- Experimental and numerical analysis of GFRP frame structures. Part 1: Cyclic behaviour at the connection levelComposite Structures, 2019
- Experimental and numerical analysis of GFRP frame structures. Part 2: Monotonic and cyclic sway behaviour of plane framesComposite Structures, 2019
- Development of a novel beam-to-column connection system for pultruded GFRP tubular profilesComposite Structures, 2017
- Progressive Failure and Ductility of FRP Composites for Construction: ReviewJournal of Composites for Construction, 2013