Global stability analysis and direct numerical simulation of boundary layers with an isolated roughness element
Open Access
- 23 September 2022
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 949, A12
Abstract
Global stability analysis and direct numerical simulation (DNS) are used to study boundary layer flows with an isolated roughness element. The aspect ratio of the element ( $\eta$ ) is small, while the ratio of element height to displacement boundary layer thickness ( $h/\delta ^{*}$ ) is large. Both steady base flows and time-averaged mean flows are able to capture the frequencies of the primary vortical structures and mode shapes. Global stability results highlight that although the varicose instability is dominant for large $h/\delta ^{*}$ , sinuous instability becomes more pronounced as $Re_h$ increases for the thin geometry ( $\eta =0.5$ ), due to increased spanwise shear in the near-wake region. Wavemaker results indicate that $\eta$ affects the convective nature of the shear layer more than the type of instability. DNS results show that different instability mechanisms lead to different development and evolution of vortical structures in the transition process. For $\eta =1$ , the varicose instability is associated with the periodic shedding of hairpin vortices, and its stronger spatial transient growth indicated by wavemaker results aids the formation of hairpin vortices farther downstream. In contrast, for $\eta =0.5$ , the interplay between varicose and sinuous instabilities results in a broader-banded energy spectrum and leads to the sinuous wiggling of hairpin vortices in the near wake when $Re_h$ is sufficiently high. A sinuous mode with a lower frequency captured by dynamic mode decomposition analysis, and associated with the ‘wiggling’ of streaks, persists far downstream and promotes transition to turbulence. A new regime map is developed to classify and predict instability mechanisms based on $Re_{hh}^{1/2}$ and $d/\delta ^{*}$ using a logistic regression model. Although the mean skin friction demonstrates different evolutions for the two geometries, both of them efficiently trip the flow to turbulence at $Re_h=1100$ . An earlier location of a fully-developed turbulent state is established for $\eta =1$ at $x \approx 110h$ .
Keywords
All Related Versions
Funding Information
- Office of Naval Research (N00014-17-1-2308)
- Office of Naval Research (N00014-20-1-2717)
This publication has 52 references indexed in Scilit:
- Simulations of spatially evolving turbulent boundary layers up toInternational Journal of Heat and Fluid Flow, 2010
- Stability of the laminar boundary layer flow encountering a row of roughness elements: Biglobal stability approach and DNSEuropean Journal of Mechanics - B/Fluids, 2008
- Global stability of base and mean flows: a general approach and its applications to cylinder and open cavity flowsJournal of Fluid Mechanics, 2007
- Structural sensitivity of the first instability of the cylinder wakeJournal of Fluid Mechanics, 2007
- Varicose instabilities in turbulent boundary layersPhysics of Fluids, 2002
- Reynolds-number-independent instability of the boundary layer over a flat surface: optimal perturbationsJournal of Fluid Mechanics, 2000
- Adjoint systems and their role in the receptivity problem for boundary layersJournal of Fluid Mechanics, 1995
- A note on an algebraic instability of inviscid parallel shear flowsJournal of Fluid Mechanics, 1980
- The laminar horseshoe vortexJournal of Fluid Mechanics, 1979
- Quasi-Newton Methods for Unconstrained OptimizationIMA Journal of Applied Mathematics, 1972