Transient behavior of thermally developing laminar flow within offset plates confined in a channel heated by radiation for integrated photovoltaic solar thermal collector applications
Open Access
- 27 August 2026
- journal article
- research article
- Published by Springer Nature in Journal of Engineering and Applied Science
- Vol. 73 (1) , 339
Abstract
Experimental and numerical investigations were conducted on the transient behavior, following power activation, of laminar flow forced-convection heat transfer for air traversing offset plates within a two-parallel-plate channel heated by radiation, which is pertinent to integrated photovoltaic/thermal air heater solar collector applications. In the numerical simulation, a two-dimensional transient model was used, and the temperature boundary conditions were determined at each time step. The experimental data showed a range of 990 to 4050 seconds for the time to reach equilibrium, depending on Re. It also revealed that the heat-transfer mechanism undergoes dynamic changes, characterized by a minimum in the convective heat-transfer coefficient, before stabilizing at a steady state, a critical factor in understanding the system's heat-transfer efficiency. Experimental and numerical findings indicated that offset plates attain steady-state temperatures that depend on plate location, ranging from 40°C to 100°C, with equilibrium times varying from 4050 seconds at Re=650 to 990 seconds at Re=2550. The transient Nusselt number initially peaks during the transition period, then stabilizes between 5 and 15 seconds, indicating that the heat-transfer mechanism undergoes dynamic changes that stabilize more quickly at higher Reynolds numbers. The model's velocity field and isothermal contour maps provide a physical explanation of the experimental results.Keywords
This publication has 15 references indexed in Scilit:
- Design optimization of staggered plates’ channel heated by radiation heat flux based on the convective heat transfer and fluid flow for hybrid Photovoltaic/Thermal systemSustainable Energy Technologies and Assessments, 2017
- Investigation of heat transfer and fluid flow in transitional regime inside a channel with staggered plates heated by radiation for PV/T systemEnergy, 2013
- Characteristics of heat transfer and fluid flow in a channel with single-row plates array oblique to flow direction for photovoltaic/thermal systemEnergy, 2010
- Characteristics of flow and heat transfer for in-line plate segments inside channel used for photovoltaic modules thermal regulationApplied Thermal Engineering, 2005
- Fundamentals of Heat Exchanger Design2003
- Experimental study of laminar flow forced-convection heat transfer in air flowing through offset plates heated by radiation heat fluxInternational Communications in Heat and Mass Transfer, 1998
- Computations of flow and heat transfer in parallel-plate fin heat exchangers on the CM-5: effects of flow unsteadiness and three-dimensionalityInternational Journal of Heat and Mass Transfer, 1997
- Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchangerExperimental Thermal and Fluid Science, 1995
- Mechanism of heat transfer enhancement due to self-sustained oscillation for an in-line fin arrayInternational Journal of Heat and Mass Transfer, 1994
- Natural-convection heat transfer from a plate with arbitrary inclinationInternational Journal of Heat and Mass Transfer, 1972