A Design of Small Area, 0.95 mW, 612–1152 MHz Open Loop Injection-Locked Frequency Multiplier for IoT Sensor Applications
Authors:
- SungJin KimSKSungJin Kim
- Dong-Gyu KimDKDong-Gyu Kim
- Chanho KimCKChanho Kim
- Dong Soo LeeDLDong Soo Lee
- Behnam Samadpoor RikanBRBehnam Samadpoor Rikan
- YoungGun PuYPYoungGun Pu
- Sang-Sun YooSYSang-Sun Yoo
- Minjae LeeMLMinjae Lee
- KeumCheol HwangKHKeumCheol Hwang
- Youngoo YangYYYoungoo Yang
- Kang-Yoon LeeKang-Yoon Lee
Open Access
Abstract
This paper presents a 612–1152 MHz Injection-Locked Frequency Multiplier (ILFM). The proposed ILFM is used to send an input signal to a receiver in only the I/Q mismatch calibration mode. Adopting a Phase-Locked Loop (PLL) to calibrate the receiver places a burden on this system because of the additional area and power consumption that is required. Instead of the PLL, to satisfy high-frequency, low-jitter and low-area requirements, a Ring Oscillator is adopted in the system. The free-running frequency of the ILFM is automatically and digitally calibrated to reflect the frequency of the injected signal from the harmonics of the reference clock. To control the frequency of the ILFM, the load current is digitally tuned with a 6-bit digital control signal. The proposed ILFM locks to the target frequency using a digitally controlled Frequency Locked Loop (FLL). This chip is fabricated using 1-poly 6-metal 0.18 µm CMOS and has achieved the wide tuning range of 612–1152 MHz. The power consumption is 0.95 mW from a supply voltage of 1.8 V. The measured phase noise of the ILFM is −108 dBc/Hz at a 1 MHz offset.Keywords
All Related Versions
This publication has 22 references indexed in Scilit:
- Frequency acquisition technique for injection‐locked clock generator using asynchronous‐sampling frequency detectionElectronics Letters, 2017
- A PVT-Robust and Low-Jitter Ring-VCO-Based Injection-Locked Clock Multiplier With a Continuous Frequency-Tracking Loop Using a Replica-Delay Cell and a Dual-Edge Phase DetectorIEEE Journal of Solid-State Circuits, 2016
- A Low-Jitter and Fractional-Resolution Injection-Locked Clock Multiplier Using a DLL-Based Real-Time PVT Calibrator With Replica-Delay CellsIEEE Journal of Solid-State Circuits, 2015
- Eliminating the Impacts of Flicker Noise and DC Offset in Zero-IF Architecture Pulse Compression RadarsIEEE Transactions on Microwave Theory and Techniques, 2014
- A Compact, Low-Power and Low-Jitter Dual-Loop Injection Locked PLL Using All-Digital PVT CalibrationIEEE Journal of Solid-State Circuits, 2013
- A 2.4-GHz Subharmonically Injection-Locked PLL With Self-Calibrated Injection TimingIEEE Journal of Solid-State Circuits, 2012
- Power-Scalable, Complex Bandpass/Low-Pass Filter With I/Q Imbalance Calibration for a Multimode GNSS ReceiverIEEE Transactions on Circuits and Systems II: Express Briefs, 2011
- A Low-IF/Zero-IF Reconfigurable Analog Baseband IC With an I/Q Imbalance Cancellation SchemeIEEE Journal of Solid-State Circuits, 2011
- A Complex Image Rejection Circuit With Sign Detection OnlyIEEE Journal of Solid-State Circuits, 2006
- The effect of I/Q imbalance and complex filter component mismatch in low-IF receiversIEEE Transactions on Circuits and Systems I: Regular Papers, 2006