Effect of electrode thickness for reducing ozone generation in electrostatic precipitator
Authors:
- Yoshiyasu EharaYEYoshiyasu Ehara
- Takeo TakahashiTTTakeo Takahashi
- Toshiaki YamamotoTYToshiaki Yamamoto
Open Access
- 10 June 2010
- journal article
- research article
- Published by Wiley in Electronics and Communications in Japan
- Vol. 93 (7) , 24-31
Abstract
The influence of electrode thickness on ozone generation in an electrostatic precipitator (ESP) was experimentally investigated. The experimental ESP was a two‐stage‐type consisting of a precharger followed by the collecting section. The precharger consisted of high‐voltage electrodes and grounded electrodes. The thickness of the high‐voltage electrodes was selected as 0.1, 0.2, 0.5, and 0.8 mm and that of the grounded electrodes was 1.0 mm. The collecting electrode section had a parallel‐plate configuration. The gases emitted from the diesel engine were diluted with air and introduced into the ESP in order to measure the particle counts. In the present study, the electric field distribution was calculated using the “Ansys” software. The relationship between ozone generation and collection efficiency was investigated. The ozone concentration was found to decrease with decreasing electrode thickness, while the same collection efficiency was maintained. This result was attributed to a decrease in the dissociation area of O2in the vicinity of the electrodes. © 2010 Wiley Periodicals, Inc. Electron Comm Jpn, 93(7): 24–31, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/ecj.10291Keywords
This publication has 5 references indexed in Scilit:
- Silver discharge electrode for suppression of ozone generation in positive dc corona2005
- Spatial distribution of ozone density in pulsed corona discharges observed by two-dimensional laser absorption methodJournal of Physics D: Applied Physics, 2004
- On assessment of ozone generation in dc coronasJournal of Physics D: Applied Physics, 2000
- Ozone generation in DC-energized electrostatic precipitatorsIEEE Transactions on Industry Applications, 1992
- Ozone Generation in an Electrostatic Precipitator With a Heated Corona WireJournal of the Air Pollution Control Association, 1975