An Inertial Impact Piezoelectric Actuator Designed by the Asymmetric Friction Principle and Achieved by Laser Texturing of the Driving Feet
Open Access
Abstract
An asymmetric friction principle is newly proposed for the design of inertial impact piezoelectric actuators. There are two ways to achieve asymmetric frictions: either by tuning the positive pressure or by tuning the friction coefficient. Compared with tuning the positive pressure by an asymmetric structure, the structural parameters can be reduced by employing a symmetric structure and tuning the friction coefficient. In this study, an asymmetric friction inertial impact actuator was developed using a symmetric compliant mechanism (SCM), and the asymmetric frictions were realized by laser texturing of the driving feet at one end of the SCM. Four kinds of microstructures were initially fabricated on the driving feet, and their friction properties were experimentally tested. Accordingly, two kinds of microstructures, namely Ta and Tb microstructures, were selected. Output characteristics of the actuator with these two microstructures were measured and comparatively analyzed. The experimental results indicate that the actuator could achieve stable step motion, and the output characteristics were affected by the fabricated microstructure, as it determined the friction coefficient. The actuator with the Tb microstructure achieved a maximum speed of 2.523 mm/s, a resolution of 188 nm, a vertical loading capacity of 2 N and a horizontal loading capacity of 0.6 N, whereas the actuator with the Ta microstructure had a higher resolution of 74 nm. This study provides a novel idea for the design of asymmetric friction inertial impact actuators by tuning the friction coefficient.Keywords
Funding Information
- National Natural Science Foundation of China (52075221, 101832020CX100, 2019–2022)
- Jilin University (52075221, 101832020CX100, 2019–2022)
- Fundamental Research Funds for the Central Universities (52075221, 101832020CX100, 2019–2022)
This publication has 41 references indexed in Scilit:
- Piezoelectric Inertia Motors—A Critical Review of History, Concepts, Design, Applications, and PerspectivesActuators, 2017
- Design and experiment performances of an inchworm type rotary actuatorReview of Scientific Instruments, 2014
- MEMS Laser Scanners: A ReviewJournal of Microelectromechanical Systems, 2014
- A piezoelectric direct-drive servo valve with a novel multi-body contacting spool-driving mechanism: Design, modelling and experimentProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013
- Piezopotential gated nanowire devices: Piezotronics and piezo-phototronicsNano Today, 2010
- Characterization of piezoelectric PZT beam actuators for driving 2D scanning micromirrorsSensors and Actuators A: Physical, 2010
- Biological couplings: Classification and characteristic rulesScience China Technological Sciences, 2009
- Progress in the bionic study on anti-adhesion and resistance reduction of terrain machinesScience China Technological Sciences, 2009
- Drag Reduction in NatureAnnual Review of Fluid Mechanics, 1991
- Precise positioner utilizing rapid deformations of a piezoelectric element.Journal of the Japan Society for Precision Engineering, 1988