Tungsten-loaded SMP foam nanocomposites with inherent radiopacity and tunable thermo-mechanical properties
- 11 August 2015
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 27 (2) , 195-203
Abstract
Shape memory polymer (SMP) foams have been developed for use in neurovascular occlusion applications. These materials are predominantly polyurethanes that are known for their biocompatibility and tunable properties. However, these polymers inherently lack X‐ray visibility, which is a significant challenge for their use as implantable materials. Herein, low density, highly porous shape memory polyurethane foams were developed with tungsten nanoparticles dispersed into the foam matrix, at increasing concentrations, to serve as a radiopaque agent. Utilizing X‐ray fluoroscopy sufficient visibility of the foams at small geometries was observed. Thermal characterization of the foams indicated altered thermal response and delayed foam actuation with increasing nanoparticle loading (because of restricted network mobility). Mechanical testing indicated decreased toughness and strength for higher loading because of disruption of the SMP matrix. Overall, filler addition imparted x‐ray visibility to the SMP foams and allowed for tuned control of the transition temperature and actuation kinetics for the material. Copyright © 2015 John Wiley & Sons, Ltd.Keywords
Funding Information
- National Institutes of Health/National Institute of Biomedical Imaging and Bioengineering (R01EB000462)
- Welch Foundation
- Laboratory for Synthetic-Biologic Interactions, Texas A&M Institute for Preclinical Studies
- Texas A&M University Graduate Diversity Fellowship
This publication has 28 references indexed in Scilit:
- Zirconia-containing radiopaque mesoporous bioactive glassesMaterials Letters, 2014
- Investigation on the use of triphenyl bismuth as radiopacifier for (di)methacrylate dental adhesivesInternational Journal of Adhesion and Adhesives, 2014
- Incorporation of an antibacterial and radiopaque monomer in to dental resin systemDental Materials, 2012
- Polyurethane thermoplastic elastomers with inherent radiopacity for biomedical applicationsJournal of Biomedical Materials Research Part A, 2012
- Polyurethanes with radiopaque propertiesBiomaterials, 2006
- Biomedical applications of polymer-composite materials: a reviewComposites Science and Technology, 2001
- Radiopaque Polymeric Materials for Medical ApplicationsInvestigative Radiology, 1999
- Biomaterials Science1996
- Tantalum-loaded polyurethane microspheres for particulate embolization: preparation and propertiesBiomaterials, 1991
- Radiopaque denture materialsThe Journal of Prosthetic Dentistry, 1972