Assessing the efficacy of three bio‐based flocculants in the reclamation of spent lubricating oil
- 1 February 2024
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 102 (6) , 2068-2082
Abstract
The current study encompasses a comprehensive assessment of three biopolymeric flocculants on the overall performance of recycling waste lubricating oil to achieve a higher percentage recovery, flocculation efficacy, and better quality of recovered base oil. The findings reveal that with experimental conditions such as (i) mixing time of 80 min; (ii) agitation speed of 400 rpm; (iii) reaction temperature 50°C; (iv) solvent to waste oil ratio 3:1 g/g; and (v) flocculant dosage 1 g/ kg of solvents, 1‐butanol and sodium alginate gives highest percentage yield of 91% followed by corn starch of 89.10% and xanthan gum of 87.18% as bio‐polymer flocculant. The effects of various process parameters of bio‐flocculants on flocculation efficiency are expounded. With the process parameters of (i) initial pH of 5.9, 6.0, and 6.2; (ii) mixing time − 59, 60, and 63 min; and (iii) solution temperature of 59, 60, and 62.2°C, maximum flocculation efficacy (% sludge removal) of 16.24%, 13.01%, and 14.09% were attained for the cases of refined oil treated with sodium alginate, corn starch, and xanthan gum, respectively. Results also reveal that the physicochemical properties of refined base oil treated with 1‐butanol and sodium alginate as bio flocculant are almost close to the virgin lubricating oil. The optimum recovery of high‐quality base oil with the adoption of green technology and solvent–bio flocculant combination can mitigate the environmental impact of waste oil and create an energy‐efficient sustainable condition for the regeneration of re‐refined base oil.Keywords
This publication has 50 references indexed in Scilit:
- Regeneration of Waste Lubricant Oil by Extraction–Flocculation Composite RefiningIndustrial & Engineering Chemistry Research, 2013
- Technology for rerefining used lube oils applied in Europe: a reviewJournal of Chemical Technology & Biotechnology, 2013
- Recycling of Waste Engine Oils Using a New Washing AgentEnergies, 2013
- Chemical Characterization of Lube OilsEnergy & Fuels, 2012
- Pretreatment of petrochemical wastewater by coagulation and flocculation and the sludge characteristicsJournal of Hazardous Materials, 2010
- Chitosan for coagulation/flocculation processes – An eco-friendly approachEuropean Polymer Journal, 2009
- Used lubricating oil management options based on life cycle thinkingResources, Conservation and Recycling, 2009
- Organic polyelectrolytes in water treatmentWater Research, 2007
- Waste Oil Recycling Using Mixtures of Polar SolventsIndustrial & Engineering Chemistry Research, 2005
- Time requirement for rapid-mixing in coagulationColloids and Surfaces A: Physicochemical and Engineering Aspects, 2002