Effect of initial failure geometry on the progress of a retrogressive seepage-induced landslide
Open Access
- 22 June 2023
- journal article
- research article
- Published by Springer Nature in International Journal of Geo-Engineering
- Vol. 14 (1) , 1-16
Abstract
Natural and man-made slopes can undergo a retrogressive landslide when subjected to seepage. Studying the mechanism of retrogressive landslides contributes greatly to the employment of effective mitigation approaches. A multi-stage limit equilibrium-based study was performed to explore how the geometry of initial failure affects the progress of a retrogressive, multiple-rotational landslide caused by seepage flow. Seepage-stability analyses were carried out on two silty sand slopes which were previously found to experience successive rotational failures upon raising the water table in centrifuge tests. Analyzed in prototype dimensions were the slope models with the height of 24 cm and inclinations of 45° (1V:1H) and 63.4° (2V:1H) tested at different centrifugal accelerations. According to the tests, the initial shallow failures were assumed to be circular initiating from the face and emerging from the toe of the slopes in the stability analyses. The impact of curvature and length of the initial failure surface (referred to as IFS) as well as the height of the scarp shaped at each failure episode were investigated. The results show that the landslide continues until the slope profile finds a stable curvature. For the landslides that occur in the 45° inclined slope, when the initial failure initiates at a higher elevation on the slope face, the landslide retrogresses further. In addition, with an increase in the length or curvature of IFS, the final retrogression distance decreases. Further, it was observed that the progress of landslides depends on the height of the scarp exposed at each failure episode.Keywords
This publication has 15 references indexed in Scilit:
- Geotechnical centrifuge modelling of retrogressive sensitive clay landslidesCanadian Geotechnical Journal, 2021
- Analysis of rainfall-triggered landslide in Baleagung Village, Magelang Regency, Central JavaE3S Web of Conferences, 2020
- Stability and Evolution of Planar and Concave Slopes under Unsaturated and Rainfall ConditionsInternational Journal of Geomechanics, 2020
- Experimental tests of slope failure due to rainfalls using 1g physical slope modelsSoils and Foundations, 2018
- Effect of seepage on shallow landslides in consideration of changes in topography: Case study including an experimental sandy slope with artificial rainfallCATENA, 2018
- Optimal profile for concave slopes under static and seismic conditionsCanadian Geotechnical Journal, 2016
- Behaviour of anchored geosynthetic-reinforced slopes subjected to seepage in a geotechnical centrifugeGeosynthetics International, 2016
- Centrifuge modelling of clay slope with montmorillonite weak layer under rainfall conditionsApplied Clay Science, 2010
- Chapter 27 Case histories of embankments on soft soils and stabilisation with geosynthetics: Canadian experience2005
- The hillslope-storage Boussinesq model for non-constant bedrock slopeJournal of Hydrology, 2004