μ-Coriolis Mass Flow Sensor With Differential Capacitive Readout
- 2 December 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (5) , 5886-5894
Abstract
In this paper we present a $\mu $ -Coriolis mass flow sensor with differential capacitive readout, which can reduce the effect of common mode vibrations caused by external disturbances. The device consists of two silicon nitride micro-channel loops mechanically connected through two membranes. The sensor is actuated using Lorentz forces, inducing rotation of the sensor's micro-channels. Coriolis forces of opposite sign are subsequently generated in the two channel loops. Thus, any common mode vibration can be distinguished from vibration induced by mass flow through the channels. Capacitive readout structures surround the sensor to detect these vibrations. A piezo-electric resonator is placed in close proximity to the sensor to generate artificial external disturbance. Flow measurements are executed to compare the differential readout method to a single ended readout with and without external disturbances. The flow sensitivity is unaffected. However, the mean deviation of the output signal is 60-70% lower when using the differential readout compared to single ended readout when external disturbances are induced. The effect of external disturbances on the zero flow stability is reduced by approximately 64% by using the differential readout. Full elimination of the effect is not possible due to non-linearity of the readout capacitors. Reducing non-linearity of the readout could further improve performance, e.g. by implementing (piezo-resistive) strain gauges on top of the micro-channel.
Keywords
Funding Information
- research program FLOW+ (15019)
- The Netherlands Organization for Scientific Research
- Bronkhorst High-Tech
- Krohne
This publication has 21 references indexed in Scilit:
- Improved capacitive detection method for Coriolis mass flow sensors enabling range/sensitivity tuningMicroelectronic Engineering, 2016
- Towards nanogram per second Coriolis mass flow sensing2016
- Differential capacitive sensing circuit for a multi-electrode capacitive force sensorSensors and Actuators A: Physical, 2015
- Coriolis flowmeters: a review of developments over the past 20 years, and an assessment of the state of the art and likely future directionsFlow Measurement and Instrumentation, 2014
- Micromachined Thermal Flow Sensors—A ReviewMicromachines, 2012
- Modeling, design, fabrication and characterization of a micro Coriolis mass flow sensorJournal of Micromechanics and Microengineering, 2010
- A portable MEMS Coriolis mass flow sensor2004
- A micromachined fully differential lateral accelerometer2002
- A high-accuracy high-speed signal processing circuit of differential-capacitance transducersIEEE Transactions on Instrumentation and Measurement, 1998
- A silicon resonant sensor structure for Coriolis mass-flow measurementsJournal of Microelectromechanical Systems, 1997