Improvement of dielectric properties of (Ba,Sr)TiO3 thin films deposited by pulse injection chemical vapor deposition
Authors:
- 16 February 1998
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 72 (7) , 786-788
Abstract
(BST) thin films were prepared on substrates by the pulse injection chemical vapor deposition (CVD) process, in which the vapor of precursors was allowed to flow periodically into the reaction chamber. The dielectric constants of BST thin films, which were deposited by pulse injection CVD, were slightly higher than those of continuous BST thin films. In addition, the leakage currents were lowered by an order of magnitude. 35 nm thick BST thin films, deposited by pulse injection CVD and postannealed at 600 °C under atmosphere for 30 min, showed a equivalent thickness of 0.64 nm, a dielectric dissipation factor less than 0.5%, and a leakage current density of at +1.5 V bias. The improvement in the electrical properties of pulse BST thin films seems to originate from better crystallinity and less carbon contamination during the pulse deposition process.
Keywords
This publication has 5 references indexed in Scilit:
- Electrical and microstructural properties of SrTiO3 thin films deposited by metalorganic chemical vapor depositionIntegrated Ferroelectrics, 1997
- Low Temperature Deposition of (Ba, Sr)TiO3 Films by Electron Cyclotron Resonance Plasma Chemical Vapor DepositionJapanese Journal of Applied Physics, 1996
- Deposition of extremely thin (Ba,Sr)TiO3 thin films for ultra-large-scale integrated dynamic random access memory applicationApplied Physics Letters, 1995
- Surface Morphologies and Electrical Properties of (Ba, Sr)TiO3 Films Prepared by Two-Step Deposition of Liquid Source Chemical Vapor DepositionJapanese Journal of Applied Physics, 1995
- Dielectric breakdown in high-ε films for ulsi DRAMs: III. Leakage current precursors and electrodesIntegrated Ferroelectrics, 1995