PWM Strategy in OVM and Six-Step Regions for Open-End Winding PMSM Fed by a Dual Inverter With a Common DC Bus
- 24 July 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (10) , 13696-13707
Abstract
This study proposes a novel pulsewidth modulation (PWM) strategy in high modulation index (MI) regions for the open-end winding permanent magnet synchronous motor fed by the dual inverter with the common dc bus. The dual-inverter system is getting attention due to the higher voltage utilization and the potential fault-tolerant capability. However, the dual-inverter system inherently suffers from the zero-sequence current (ZSC) flowing due to the opened neutral point of the stator windings and the common dc bus. This ZSC causes negative effects, such as power loss and torque ripple. Various PWM schemes have been proposed to suppress the ZSC. However, the conventional methods focus on a linear MI region and have performance degradation due to the limited voltage modulation margin. This study proposes simple PWM schemes for the ZSC control in the overmodulation and six-step regions. The proposed method can suppress the ZSC while maximizing the voltage utilization with minimum switching loss increase. Simulation and experimental results are provided to verify the performance of the proposed PWM strategy.Keywords
Funding Information
- National Research Foundation of Korea (RS-2023-00277751, NRF-2021R1G1A1004197)
This publication has 34 references indexed in Scilit:
- Adaptive Capacitor Voltage-Based Model Predictive Control for Open-Winding PMSM System With a Floating CapacitorIEEE Journal of Emerging and Selected Topics in Power Electronics, 2022
- Model Predictive Full-Torque Control for the Open-Winding PMSM System Driven by Dual Inverter With a Common DC BusIEEE Journal of Emerging and Selected Topics in Power Electronics, 2020
- Voltage-Injected PWM Variants for a Dual Two-Level Inverter-Fed Open-End Winding Induction Motor DriveIEEE Journal of Emerging and Selected Topics in Power Electronics, 2020
- Predictive Torque Control for Open-End Winding PMSM With Common DC Bus Based on Weighting Factorless and Finite Control Set OptimizationIEEE Journal of Emerging and Selected Topics in Power Electronics, 2019
- Multilevel Torque Hysteresis-Band Based Direct-Torque Control Strategy for a Three-Level Open-End Winding Induction Motor Drive for Electric Vehicle ApplicationsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2018
- Pulse width modulation schemes enabling single DC power source driven dual two‐level voltage source inverter with single voltage source inverter switchingIET Power Electronics, 2014
- Common mode voltage elimination PWMs for a dual two-level VSI with single inverter switching2012
- Pulse width-modulated switching strategy for the dynamic balancing of zero-sequence current for a dual-inverter fed open-end winding induction motor driveIET Electric Power Applications, 2007
- Switching Technique for Dual-Two level Inverter Supplied by Two Separate SourcesAPEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition, 2007
- Dual two-level inverter scheme for an open-end winding induction motor drive with a single DC power supply and improved DC bus utilisationIEE Proceedings - Electric Power Applications, 2004