Parametric Analysis and Numerical Optimization of Root-Cutting Shovel of Cotton Stalk Harvester Using Discrete Element Method
Open Access
- 25 August 2024
- journal article
- research article
- Published by MDPI AG in Agriculture
- Vol. 14 (9) , 1451
Abstract
Aiming at solving the problems of the high cost of manual pulling, the low reliability of existing pulling devices, and the high breaking rates and high leakage rates in the process of cotton stalk reuse after removal from the field in the Xinjiang cotton area, a soil-loosening and root-cutting cotton stalk pulling and gathering machine was researched and designed; a root-cutting force model was established; the key parameters of the V-shaped root-cutting knife were calculated and optimized; and the ranges of the slide cutting angle, the cutting-edge angle, and the soil entry angle were determined. A shoveling process simulation of the V-shaped root-cutting knife and the root–soil complex was constructed, and the working mechanism of the V-shaped root-cutting knife was clarified. In order to verify the reliability and operation performance of the V-shaped root-cutting knife, the slide cutting angle, the cutting-edge angle, and the soil entry angle were used as the test factors, and a response surface test with three factors and three levels was carried out with the root-breaking force and the mean value of the cutting resistance as the test indices. The test results were analyzed by variance analysis, and the significant factors influencing the root-breaking force in descending order were the slide cutting angle, cutting-edge angle, and soil entry angle. The degrees of influence on the mean value of the cutting resistance were ordered as follows: slide cutting angle, soil entry angle, and cutting-edge angle. In order to make the V-shaped root-cutting knife achieve the optimal working state, the parameters of the test indices were optimized, and the optimal design parameters of the V-shaped root-cutting knife were set as follows: the slide cutting angle was 48.3°, the cutting-edge angle was 43.4°, and the soil entry angle was 26.2°. The field uprooting test showed that the average pass rate of root breakage was 94.8% and the average pull-out rate of cotton stalks was 93.2%. This study provides theoretical guidance for the development of a root-breaking mechanism for cotton straw harvesters.Keywords
All Related Versions
Funding Information
- National Key Research and Development Program of China (2022YFD2002400, 2022B02033-2, 2023AB014, NCG202302, QS2023006)
- Autonomous Region Key research and development task special project of Xinjiang, China (2022YFD2002400, 2022B02033-2, 2023AB014, NCG202302, QS2023006)
- Bintuan Science and Technology Program (2022YFD2002400, 2022B02033-2, 2023AB014, NCG202302, QS2023006)
- the Innovation Team of Xinjiang Academy of Agricultural and Reclamation Sciences (2022YFD2002400, 2022B02033-2, 2023AB014, NCG202302, QS2023006)
- Seventh Division—Shihezi University Science and Technology Innovation Special Project (2022YFD2002400, 2022B02033-2, 2023AB014, NCG202302, QS2023006)
This publication has 17 references indexed in Scilit:
- Cotton stalk valorization towards bio-based materials, chemicals, and biofuels: A reviewRenewable and Sustainable Energy Reviews, 2024
- Unlocking the potential of cotton stalk as a renewable source of cellulose: A review on advancements and emerging applicationsInternational Journal of Biological Macromolecules, 2024
- Parametric analysis and numerical optimisation of spinach root vibration shovel cutting using discrete element methodComputers and Electronics in Agriculture, 2023
- Discrete element method for simulation and calibration of cotton stalk contact parametersBioResources, 2022
- Parametric analysis and numerical optimisation of Jerusalem artichoke vibrating digging shovel using discrete element methodSoil and Tillage Research, 2022
- Preparation and Research of Environment-friendly Degradable Paper Mulching Film of Cotton Stalk FiberIOP Conference Series: Earth and Environmental Science, 2018
- Preparation and properties of cotton stalk bark fibers and their cotton blended yarns and fabricsJournal of Cleaner Production, 2016
- Structural Bionic Design for Digging Shovel of Cassava Harvester Considering Soil MechanicsApplied Bionics and Biomechanics, 2014
- The destemming of grapes: Experiments and discrete element modellingBiosystems Engineering, 2013
- Properties and potential applications of natural cellulose fibers from the bark of cotton stalksBioresource Technology, 2009