JXJianhua Xie

Jianhua Xie

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jianhua Xie has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Parametric Analysis and Numerical Optimization of Root-Cutting Shovel of Cotton Stalk Harvester Using Discrete Element Method

    by Hua Liu, Silin Cao, Dalong Han, Lei He, Yuanze Li, Jialin Cai, Hewei Meng, Shilong Wang

    Aiming at solving the problems of the high cost of manual pulling, the low reliability of existing pulling devices, and the high breaking rates and high leakage rates in the process of cotton stalk reuse after removal from the field in the Xinjiang cotton area, a soil-loosening and root-cutting cotton stalk pulling and gathering machine was researched and designed; a root-cutting force model was established; the key parameters of the V-shaped root-cutting knife were calculated and optimized; and the ranges of the slide cutting angle, the cutting-edge angle, and the soil entry angle were determined. A shoveling process simulation of the V-shaped root-cutting knife and the root–soil complex was constructed, and the working mechanism of the V-shaped root-cutting knife was clarified. In order to verify the reliability and operation performance of the V-shaped root-cutting knife, the slide cutting angle, the cutting-edge angle, and the soil entry angle were used as the test factors, and a response surface test with three factors and three levels was carried out with the root-breaking force and the mean value of the cutting resistance as the test indices. The test results were analyzed by variance analysis, and the significant factors influencing the root-breaking force in descending order were the slide cutting angle, cutting-edge angle, and soil entry angle. The degrees of influence on the mean value of the cutting resistance were ordered as follows: slide cutting angle, soil entry angle, and cutting-edge angle. In order to make the V-shaped root-cutting knife achieve the optimal working state, the parameters of the test indices were optimized, and the optimal design parameters of the V-shaped root-cutting knife were set as follows: the slide cutting angle was 48.3°, the cutting-edge angle was 43.4°, and the soil entry angle was 26.2°. The field uprooting test showed that the average pass rate of root breakage was 94.8% and the average pull-out rate of cotton stalks was 93.2%. This study provides theoretical guidance for the development of a root-breaking mechanism for cotton straw harvesters.


  • Open Access

    Parametric Analysis and Numerical Optimisation of Root-Cutting Shovel of Cotton Stalk Harvester Using Discrete Element Method

    by Hua Liu, Silin Cao, Dalong Han, Lei He, Yuanze Li, Jialin Cai, Hewei Meng, Shilong Wang

    Aiming at the problems of high cost of manual pulling, low reliability of existing pulling devices, high breaking rate and high leakage rate in the process of cotton stalk reuse after leaving the field in Xinjiang cotton area, a loosening soil and root-cutting cotton stalk pulling the setting machine has been researched and designed, established the root-cutting force model, calculated and optimized the key parameters of the V-shaped root-cutting knife, and determined the range of slide cutting angle, cutting edge angle and soil entry angle. The shoveling process simulation of V-shaped root-cutting knife and root-soil complex was constructed, and the working mechanism of V-shaped root-cutting knife was clarified. In order to verify the reliability and operation performance of the V-shaped root-cutting knife, the slide cutting angle, cutting edge angle and soil entry angle were used as the test factors, the response surface test of three-factors and three-levels was carried out with root-breaking force and mean value of the cutting resistance as the test index. The test results were analyzed by variance analysis, the significant of influencing factors on the root-breaking force are in a descending order as: slide cutting angle, cutting edge angle, soil entry angle; the degree of influence on the mean value of the cutting resistance are as follows: slide cutting angle, soil entry angle, cutting edge angle. In order to make the V-shaped root-cutting knife achieve the optimal working state, the parameters of the test index were optimized, and the optimal design parameters of the V-shaped root-cutting knife were set as follows: the slide cutting angle was 48.3°, cutting edge angle was 43.4°, and soil entry angle was 26.2°. The field uprooting test showed that the average pass rate of root breakage was 94.8% and the average pull-out rate of the cotton stalk was 93.2%. This study provides theoretical guidance for the development of root breaking mechanism of cotton straw harvester.


  • Open Access

    Detection of Residual Film on the Field Surface Based on Faster R-CNN Multiscale Feature Fusion

    by Tong Zhou, Yongxin Jiang, Xuenong Wang, Jianhua Xie, Changyun Wang, Qian Shi, Yi Zhang

    After the residual film recycling machine recovers the film, some small pieces of the film will remain on the surface of the field. To solve the problem of collecting small pieces of film, it is necessary to develop a piece of intelligent picking equipment. The detection of small pieces of film is the first problem to be solved. This study proposes a method of an object detection algorithm fusing multi-scale features (MFFM Faster R-CNN) based on improved Faster R-CNN. Based on the Faster R-CNN model, the feature pyramid network is added to solve the problem of multiscale change of residual film. The convolution block attention module is introduced to enhance the feature extraction ability of the model. The Soft-NMS algorithm is used instead of the NMS algorithm to improve the detection accuracy of the model in the RPN network. The experimental results show that the model is able to effectively detect surface residual film in complex environments, with an AP of 83.45%, F1-score of 0.89, and average detection time of 248.36 ms. The model is compared with SSD and YOLOv5 under the same experimental environment and parameters, and it is found that the model not only ensures high-precision detection but also ensures real-time detection. This lays the theoretical foundation for the subsequent development of field surface residual film intelligent picking equipment.


  • Open Access

    Design and Operating Parameters Optimization of the Hook-and-Tooth Chain Rail Type Residual Film Picking Device

    by Silin Cao, Jianhua Xie, Hezheng Wang, Yuxin Yang, Yanhong Zhang, Jinbao Zhou, Shihua Wu

    We attempt to solve the current problems of high impurity content and the poor reliability of chain harrow type residual film recovery machines when picking up residual film. This study makes a device for picking up residual film with a hook-and-tooth chain rail. First, we conducted an analysis of the trajectory of the tip movement of the hooked teeth in the designed picking device, with the condition that the residual mulch does not miss the picking, and the force conditions of the residual mulch in the conveying process and the collection process are presented. Secondly, to determine the optimal working parameters of the picking device, a three-factor, three-level response surface optimization test was conducted with the machine forward speed, hook tooth entry depth, and chain harrow input speed as the test factors and the residual film picking rate and the impurity rate of residual film as the test indexes. In addition, a response surface regression model was developed to analyze the effects of the selected factors on the picking device. When the forward speed of the machine was 1.62 m/s, the hook tooth entry depth was 38.51 mm, and the input speed of the chain harrow was 241.42 rpm, the pickup rate and the impurity rate of the residual film were 88.27% and 9.96%, respectively. Finally, the simulation test was carried out under optimal working conditions, with the maximum force of the hook teeth being 60.7 N, the maximum deformation being 31.42 mm, and the maximum stress being 215.33 Mpa. This study can be used as a guide to further improve the design of the residual film recovery machine.


  • Open Access

    Design of Cotton Recovery Device and Operation Parameters Optimization

    by Hezheng Wang, Silin Cao, Yongrui Liu, Yuxin Yang, Xiangyu Meng, Peng Ji

    This research aims to optimize the working parameters of the sawtooth-type recovery device for cotton fallen on the ground to enhance cotton’s recovery effect. Firstly, the cotton-picking mechanism and cotton unloading mechanism of the cotton recovery device were designed. The movement trajectory of the serrated tooth end of the designed device, the cotton non-missing picking condition, and the cotton unloading condition were noted. Secondly, virtual simulation technology developed a model of the interaction process between the picking equipment and the soil. To determine the optimal combination of operating parameters for the recovery device, a three-factor, three-level response surface optimization test was conducted using Box–Behnken’s central combination method with operating machine speed, spacing between serrated discs, and serrated disc speed as the test factors, and the picking and impurity rate as the test indexes. In addition, a response surface regression model was developed to analyze the effects of the selected factors on the recovery unit, and each factor was optimized. When the picking and impurity rates were 79.09% and 35.12%, respectively, the optimal operating speed of the machine was 0.96 m/s, the spacing of the serrated discs was 40 mm, and the speed of the serrated discs was 68 rpm. The relative error between the experimental findings and the theoretical optimized values was less than 5%, and the optimized working parameters were reliable. This study can provide a reference for the device used to recover cotton that has fallen to the ground.