Effects of Sintering Temperature on Structural, Magnetic and Microwave Absorption Properties of Ni0.5zn0.5fe2o4 Ferrites
Authors:
- Anping WangAWAnping Wang
- Yu GaoYGYu Gao
- Guoguo TanGTGuoguo Tan
- Zhenchen ZhongZZZhenchen Zhong
- Qikui ManQMQikui Man
Preprint
- 1 January 2022
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Ni 0.5 Zn 0.5 Fe 2 O 4 ferrites were prepared by the sol-gel auto-combustion method and sintered at 1150°C, 1250°C, 1350°C and 1450°C. Structural, magnetic, and microwave absorption properties were investigated by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectra, Physical property measurement system and vector network analyzer, respectively. Sintering temperature has a remarkable effect on the concentration of both Fe 2+ and oxygen vacancies and further influence the permittivity and permeability. The excellent microwave absorption properties are obtained at the sintering temperature of 1350°C, and its effective absorption bandwidth reaches 9.55 GHz from 3.67 to 13.22 GHz at a thin thickness of 2.5 mm. It is notable that the two reflection loss peaks of Ni 0.5 Zn 0.5 Fe 2 O 4 ferrites appeared at both low and high frequency regions. The peak at low frequency is associated with the great magnetic loss tangent (>1) and the peak at high frequency satisfies the quarter-wavelength matching model. The microwave absorption performance of Ni 0.5 Zn 0.5 Fe 2 O 4 ferrites was attributed to both dielectric and magnetic mechanisms while the magnetic part dominates.Keywords
This publication has 23 references indexed in Scilit:
- The improved saturation magnetization and initial permeability in Mn–NiZn ferrites after cooling in vacuumApplied Physics A, 2022
- Self-assembled MoS2/3D worm-like expanded graphite hybrids for high-efficiency microwave absorptionCarbon, 2021
- Fabrication of Nd-doped Ni–Zn ferrite/multi-walled carbon nanotubes composites with effective microwave absorption propertiesCeramics International, 2021
- The influence of Nd substitution in Ni–Zn ferrites for the improved microwave absorption propertiesCeramics International, 2020
- Effect of Fe2+/Fe3+ ratio on photocatalytic activities of Zn1-Fe O nanoparticles fabricated by the auto combustion methodCeramics International, 2020
- Constructing hollow graphene nano-spheres confined in porous amorphous carbon particles for achieving full X band microwave absorptionCarbon, 2019
- 3D ferromagnetic graphene nanocomposites with ZnO nanorods and Fe 3 O 4 nanoparticles co-decorated for efficient electromagnetic wave absorptionComposites Part B: Engineering, 2018
- Microwave Absorption Properties of Cobalt-Zirconium Doped Strontium Hexaferrites in Ku-Frequency BandJournal of Superconductivity and Novel Magnetism, 2017
- Three-dimensional reduced graphene oxide foam modified with ZnO nanowires for enhanced microwave absorption propertiesCarbon, 2017
- Fabrication of porous graphene-Fe 3 O 4 hybrid composites with outstanding microwave absorption performanceComposites Part A: Applied Science and Manufacturing, 2017