Anodic electrochemical dissolution behaviors of SUS304 stainless steel and its surface characteristics by scanning electrochemical machining
Open Access
- 21 February 2026
- journal article
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 19, 8872025
Abstract
The ultra-thin SUS304 strip is a key material for various engineering applications, including aerospace and electronic communication, due to its excellent corrosion resistance and machining precision. Cold rolling is the primary method for machining the SUS304 strip; however, as the thickness decreases, surface processing defects can emerge, resulting in low surface quality and affecting the properties of the SUS304 strip. Existing methods cannot simultaneously achieve low cost, high quality, and high efficiency. In this study, scanning electrochemical machining (SECM) was adopted to efficiently and cost-effectively improve machining quality through the straight reciprocating motion of the cathode. First, the anodic dissolution characteristics of SUS304 stainless steel immersed in 10 wt% NaNO 3 solution at 298.15 K were investigated, confirming the effectiveness of NaNO 3 as an electrolyte for SECM. It was found that high current density can result in low surface roughness. Subsequently, the SUS304 strip is machined by SECM. The machined surface is compared with that produced by cold rolling from four aspects. The results show that SECM significantly reduces surface roughness Sa and Sz, with reductions of 85.5% and 79.2%, respectively. Moreover, the surface hardness, residual stress, and frictional wear are essentially the same as those of the strip processed by cold rolling. These findings validate that SECM can be used to improve the surface characteristics of SUS304 strip after cold rolling.Keywords
This publication has 33 references indexed in Scilit:
- Gradient thickness-dependent distribution of residual stress and springback of thin-walled TC4 titanium alloy sheet with variable thickness in collaborative manufacturing process of pre-plastic forming and millingThe International Journal of Advanced Manufacturing Technology, 2025
- Effect of two-pass rolling of textured roll and polished roll on surface topography and mechanical properties of 316L stainless steel ultra-thin stripJournal of Iron and Steel Research International, 2024
- Effect of carbides on the electrochemical dissolution behavior of solid-solution strengthened cobalt-based superalloy Haynes 188 in NaNO3 solutionCorrosion Science, 2023
- Surface Integrity and Core Loss in Lamination Coated Thin Sheets of M-43 Grade Cold Rolled Non-grain-Oriented Electrical SteelJournal of Materials Engineering and Performance, 2022
- Combined electrochemical and mechanical polishing of interior channels in parts made by additive manufacturingAdditive Manufacturing, 2022
- Electrochemical dissolution behavior of S-04 high-strength stainless steel in NaNO3 aqueous solutionJournal of Applied Electrochemistry, 2020
- Effect of atmospheric aging on dissolution of MnS inclusions and pitting initiation process in type 304 stainless steelCorrosion Science, 2016
- Investigation of the electrochemical dissolution behavior of Inconel 718 and 304 stainless steel at low current density in NaNO3 solutionElectrochimica Acta, 2015
- The mechanism of anodic dissolution of cobalt in neutral and alkaline electrolyte at high current densityElectrochimica Acta, 2013
- Microelectrochemical surface and product investigations during electrochemical machining (ECM) in NaNO3Corrosion Science, 2005