Jing Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jing Wang has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Bo Hu
Key Laboratory of Precision Machining of Shanxi Province, College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China
1 shared publication - Congbo Li
Chongqing University
1 shared publication - Jianyu Jia
Key Laboratory of Precision Machining of Shanxi Province, College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China
1 shared publication - Wenfeng Xiang
Taizhou Jiuju Technology Co., Ltd., Taizhou 317600, China
1 shared publication Wenyun Li
College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan, Shanxi, China
1 shared publicationXiaokang Yue
School of Mechanical Engineering, Hefei University of Technology, Hefei, Anhui, China
1 shared publication
Latest Publications
- Open Access
- 21 February 2026
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 19, 8872025
Anodic electrochemical dissolution behaviors of SUS304 stainless steel and its surface characteristics by scanning electrochemical machining
The ultra-thin SUS304 strip is a key material for various engineering applications, including aerospace and electronic communication, due to its excellent corrosion resistance and machining precision. Cold rolling is the primary method for machining the SUS304 strip; however, as the thickness decreases, surface processing defects can emerge, resulting in low surface quality and affecting the properties of the SUS304 strip. Existing methods cannot simultaneously achieve low cost, high quality, and high efficiency. In this study, scanning electrochemical machining (SECM) was adopted to efficiently and cost-effectively improve machining quality through the straight reciprocating motion of the cathode. First, the anodic dissolution characteristics of SUS304 stainless steel immersed in 10 wt% NaNO 3 solution at 298.15 K were investigated, confirming the effectiveness of NaNO 3 as an electrolyte for SECM. It was found that high current density can result in low surface roughness. Subsequently, the SUS304 strip is machined by SECM. The machined surface is compared with that produced by cold rolling from four aspects. The results show that SECM significantly reduces surface roughness Sa and Sz, with reductions of 85.5% and 79.2%, respectively. Moreover, the surface hardness, residual stress, and frictional wear are essentially the same as those of the strip processed by cold rolling. These findings validate that SECM can be used to improve the surface characteristics of SUS304 strip after cold rolling.
- 21 February 2026
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 19, 8872025
Open AccessAnodic electrochemical dissolution behaviors of SUS304 stainless steel and its surface characteristics by scanning electrochemical machining
The ultra-thin SUS304 strip is a key material for various engineering applications, including aerospace and electronic communication, due to its excellent corrosion resistance and machining precision. Cold rolling is the primary method for machining the SUS304 strip; however, as the thickness decreases, surface processing defects can emerge, resulting in low surface quality and affecting the properties of the SUS304 strip. Existing methods cannot simultaneously achieve low cost, high quality, and high efficiency. In this study, scanning electrochemical machining (SECM) was adopted to efficiently and cost-effectively improve machining quality through the straight reciprocating motion of the cathode. First, the anodic dissolution characteristics of SUS304 stainless steel immersed in 10 wt% NaNO 3 solution at 298.15 K were investigated, confirming the effectiveness of NaNO 3 as an electrolyte for SECM. It was found that high current density can result in low surface roughness. Subsequently, the SUS304 strip is machined by SECM. The machined surface is compared with that produced by cold rolling from four aspects. The results show that SECM significantly reduces surface roughness Sa and Sz, with reductions of 85.5% and 79.2%, respectively. Moreover, the surface hardness, residual stress, and frictional wear are essentially the same as those of the strip processed by cold rolling. These findings validate that SECM can be used to improve the surface characteristics of SUS304 strip after cold rolling.
- Open Access
- 29 November 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (12) , 2178
Research on Geometric Constraint Strategies for Controlling the Diameter of Micro-Shafts Manufactured via Wire Electric Discharge Grinding
Micro-tools comprising difficult-to-machine materials have seen widespread application in micro-manufacturing to satisfy the demands of micro-part processing and micro-device development. Taking micro-shafts as an example, the related developmental technology, based on wire electric discharge grinding (WEDG) as the core method, is one of the key technologies used to prepare high-precision micro-shafts. To enable efficient and high-precision machining of micro-shafts with target diameters, instead of performing multiple repeated on-machine measurements and reprocessing, a geometric constraint strategy is proposed based on the previously introduced twin-mirroring-wire tangential feed electrical discharge grinding (TMTF-WEDG). This strategy encompasses the tool setting method, tangential feed distance compensation, and an equation that establishes the relationship between tangential distance and diameter variation. These components are derived from a key points analysis of the geometric constraints. The micro-shafts with diameters of 50 µm and consistencies of ±1.5 µm are repeatedly processed. A series of micro-shafts with diameters ranging from 30 µm to 120 µm achieve geometric constraints with a diameter accuracy of ±2 µm, accompanied by the complete continuous automation of the entire process. Accordingly, it can be concluded that the geometric constraint strategy is flexible and stable and can be controlled with high precision in the TMTF-WEDG process.
- 29 November 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (12) , 2178
Open AccessResearch on Geometric Constraint Strategies for Controlling the Diameter of Micro-Shafts Manufactured via Wire Electric Discharge Grinding
Micro-tools comprising difficult-to-machine materials have seen widespread application in micro-manufacturing to satisfy the demands of micro-part processing and micro-device development. Taking micro-shafts as an example, the related developmental technology, based on wire electric discharge grinding (WEDG) as the core method, is one of the key technologies used to prepare high-precision micro-shafts. To enable efficient and high-precision machining of micro-shafts with target diameters, instead of performing multiple repeated on-machine measurements and reprocessing, a geometric constraint strategy is proposed based on the previously introduced twin-mirroring-wire tangential feed electrical discharge grinding (TMTF-WEDG). This strategy encompasses the tool setting method, tangential feed distance compensation, and an equation that establishes the relationship between tangential distance and diameter variation. These components are derived from a key points analysis of the geometric constraints. The micro-shafts with diameters of 50 µm and consistencies of ±1.5 µm are repeatedly processed. A series of micro-shafts with diameters ranging from 30 µm to 120 µm achieve geometric constraints with a diameter accuracy of ±2 µm, accompanied by the complete continuous automation of the entire process. Accordingly, it can be concluded that the geometric constraint strategy is flexible and stable and can be controlled with high precision in the TMTF-WEDG process.