Valorization of Spent Hops (Humulus lupulus L.) into Biochar and Activated Carbon: Characterization, Phenol Adsorption, and Cost Assessment
Authors:
- Natallia Britto Azevedo SouzaNSNatallia Britto Azevedo Souza
- Micheli Legemann MonteMMMicheli Legemann Monte
- Keli Arruda da SilvaKSKeli Arruda da Silva
- Daniele Gomes MüllerDMDaniele Gomes Müller
- Daiane DiasDDDaiane Dias
- Nauro da Silveira Jr.NJNauro da Silveira Jr.
- Rafael Lipinski PaesRPRafael Lipinski Paes
- Débora Pez JaeschkeDébora Pez Jaeschke
- Tito Roberto Sant’Anna Cadaval Jr.TJTito Roberto Sant’Anna Cadaval Jr.
- Luiz Antonio de Almeida PintoLuiz Antonio de Almeida Pinto
Open Access
Abstract
Spent hops generated during the dry-hopping stage of beer production were investigated as a precursor for the production of biochar and ZnCl2-activated carbon for phenol adsorption from aqueous solutions. The effects of production conditions on adsorption performance were evaluated through factorial experimental designs, and the resulting materials were characterized by SEM, FTIR, and N2 adsorption–desorption analyses. Chemical activation significantly enhanced the textural properties of the material, increasing the specific surface area from 113.6 to 755.9 m2 g−1 and the pore volume from 0.087 to 0.442 cm3 g−1 compared with biochar. FTIR analysis revealed the presence of oxygen-containing functional groups and aromatic structures that may contribute to phenol adsorption. The activated carbon produced under optimized conditions (700 °C, 30 min, and 130 μm particle size) exhibited an adsorption capacity of 57.32 mg g−1. Kinetic experiments showed rapid adsorption, with equilibrium reached within approximately 60 min, and the pseudo-second-order model provided the best fit to the experimental data (R2 = 0.999). Equilibrium studies demonstrated that adsorption capacity increased with temperature, reaching a Langmuir maximum adsorption capacity of 727.46 mg g−1 at 55 °C. Economic analysis showed that activated carbon presented a higher production cost than biochar (24.35 versus 13.40 US$ kg−1). However, its superior adsorption performance resulted in a lower performance-adjusted cost (0.516 versus 0.856 US$ g−1 of phenol adsorbed). These findings demonstrate that spent hops are a promising feedstock for the production of activated carbon, contributing to both wastewater treatment and the valorization of brewing-industry residues.Keywords
Funding Information
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
This publication has 70 references indexed in Scilit:
- Preparation of activated carbon from pine (Pinus radiata) sawdust by chemical activation with zinc chloride for wood dye adsorptionBiomass Conversion and Biorefinery, 2023
- Activated carbon from hydrolysis lignin: Effect of activation method on carbon propertiesBiomass and Bioenergy, 2022
- Mesoporous and adsorption behavior of algal biochar prepared via sequential hydrothermal carbonization and ZnCl2 activationBioresource Technology, 2022
- Formation of improved activated carbons from sugarcane bagasse as environmental materials for adsorption of phenolic pollutantsInternational Journal of Environmental Science and Technology, 2021
- Steam-activated carbon from malt bagasse: Optimization of preparation conditions and adsorption studies of sunset yellow food dyeArabian Journal of Chemistry, 2021
- Removal of amoxicillin from simulated hospital effluents by adsorption using activated carbons prepared from capsules of cashew of ParaEnvironmental Science and Pollution Research, 2019
- Production of Biochar from Food Waste and its Application for Phenol Removal from Aqueous SolutionWater, Air, & Soil Pollution, 2019
- Humulus lupulus L., a very popular beer ingredient and medicinal plant: overview of its phytochemistry, its bioactivity, and its biotechnologyPhytochemistry Reviews, 2018
- Application of ultrasound modified corn straw as adsorbent for malachite green removal from synthetic and real effluentsEnvironmental Science and Pollution Research, 2017
- Insights into the modeling of adsorption isotherm systemsChemical Engineering Journal, 2010