Nauro Silveira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Nauro Silveira has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Luiz Antonio Almeida Pinto
Federal University of Rio Grande
6 shared publications - Tito Roberto Sant'ANna Cadaval
School of Chemistry and Food, Federal University of Rio Grande (FURG), km 8 Italia Avenue, Rio Grande 96203-900, RS, Brazil
6 shared publications - Débora Pez Jaeschke
School of Chemistry and Food, Federal University of Rio Grande (FURG), km 8 Italia Avenue, Rio Grande 96203-900, RS, Brazil
4 shared publications - Daiane Dias
Universidade Federal do Rio Grande
2 shared publications - Rafael Lipinski Paes
Production Engineer Laboratory, School of Engineering, Federal University of Rio Grande (FURG), Italia Avenue 8 km, Rio Grande 96203-900, RS, Brazil
2 shared publications - Adilson Luís Bamberg
Empresa Brasileira de Pesquisa Agropecuária
1 shared publication
Latest Publications
- Open Access
Valorization of Spent Hops (Humulus lupulus L.) into Biochar and Activated Carbon: Characterization, Phenol Adsorption, and Cost Assessment
Spent hops generated during the dry-hopping stage of beer production were investigated as a precursor for the production of biochar and ZnCl2-activated carbon for phenol adsorption from aqueous solutions. The effects of production conditions on adsorption performance were evaluated through factorial experimental designs, and the resulting materials were characterized by SEM, FTIR, and N2 adsorption–desorption analyses. Chemical activation significantly enhanced the textural properties of the material, increasing the specific surface area from 113.6 to 755.9 m2 g−1 and the pore volume from 0.087 to 0.442 cm3 g−1 compared with biochar. FTIR analysis revealed the presence of oxygen-containing functional groups and aromatic structures that may contribute to phenol adsorption. The activated carbon produced under optimized conditions (700 °C, 30 min, and 130 μm particle size) exhibited an adsorption capacity of 57.32 mg g−1. Kinetic experiments showed rapid adsorption, with equilibrium reached within approximately 60 min, and the pseudo-second-order model provided the best fit to the experimental data (R2 = 0.999). Equilibrium studies demonstrated that adsorption capacity increased with temperature, reaching a Langmuir maximum adsorption capacity of 727.46 mg g−1 at 55 °C. Economic analysis showed that activated carbon presented a higher production cost than biochar (24.35 versus 13.40 US$ kg−1). However, its superior adsorption performance resulted in a lower performance-adjusted cost (0.516 versus 0.856 US$ g−1 of phenol adsorbed). These findings demonstrate that spent hops are a promising feedstock for the production of activated carbon, contributing to both wastewater treatment and the valorization of brewing-industry residues.
Open AccessValorization of Spent Hops (Humulus lupulus L.) into Biochar and Activated Carbon: Characterization, Phenol Adsorption, and Cost Assessment
Spent hops generated during the dry-hopping stage of beer production were investigated as a precursor for the production of biochar and ZnCl2-activated carbon for phenol adsorption from aqueous solutions. The effects of production conditions on adsorption performance were evaluated through factorial experimental designs, and the resulting materials were characterized by SEM, FTIR, and N2 adsorption–desorption analyses. Chemical activation significantly enhanced the textural properties of the material, increasing the specific surface area from 113.6 to 755.9 m2 g−1 and the pore volume from 0.087 to 0.442 cm3 g−1 compared with biochar. FTIR analysis revealed the presence of oxygen-containing functional groups and aromatic structures that may contribute to phenol adsorption. The activated carbon produced under optimized conditions (700 °C, 30 min, and 130 μm particle size) exhibited an adsorption capacity of 57.32 mg g−1. Kinetic experiments showed rapid adsorption, with equilibrium reached within approximately 60 min, and the pseudo-second-order model provided the best fit to the experimental data (R2 = 0.999). Equilibrium studies demonstrated that adsorption capacity increased with temperature, reaching a Langmuir maximum adsorption capacity of 727.46 mg g−1 at 55 °C. Economic analysis showed that activated carbon presented a higher production cost than biochar (24.35 versus 13.40 US$ kg−1). However, its superior adsorption performance resulted in a lower performance-adjusted cost (0.516 versus 0.856 US$ g−1 of phenol adsorbed). These findings demonstrate that spent hops are a promising feedstock for the production of activated carbon, contributing to both wastewater treatment and the valorization of brewing-industry residues.
- Open Access
Adsorption of Erythrosine Red onto Silica Synthesized with Ora-Pro-Nobis as a Natural Porogenic Template: Equilibrium, Kinetic, and Thermodynamic Evaluation
In this study, a silica-based adsorbent was synthesized via a two-step sol–gel route. A branch of ora-pro-nobis (Pereskia aculeata Miller) was used as a porogenic template. The biomass was incorporated into the silica matrix and subsequently removed by calcination. The resulting material was characterized by nitrogen adsorption–desorption analysis, scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC), and its performance for erythrosine red adsorption from aqueous solution was evaluated. The incorporation of the biotemplate modified the pore structure of the silica, decreasing the BET specific surface area from 297.33 to 249.10 m2 g−1 while increasing the average BJH pore diameter from 2.26 to 3.66 nm. Adsorption was favored at pH 6 and rapidly approached equilibrium within approximately 5–7 min. The equilibrium data were satisfactorily described by the Langmuir model, with a maximum adsorption capacity of 108.81 mg g−1 at 25 °C. Adsorption capacity decreased with increasing temperature, and thermodynamic analysis indicated a spontaneous and exothermic process (ΔH° = −8.07 kJ mol−1). Overall, ora-pro-nóbis biomass acted as a renewable porogenic biotemplate, modifying the pore architecture of silica. The resulting TSOPN material exhibited competitive adsorption performance for erythrosine removal.
Open AccessAdsorption of Erythrosine Red onto Silica Synthesized with Ora-Pro-Nobis as a Natural Porogenic Template: Equilibrium, Kinetic, and Thermodynamic Evaluation
In this study, a silica-based adsorbent was synthesized via a two-step sol–gel route. A branch of ora-pro-nobis (Pereskia aculeata Miller) was used as a porogenic template. The biomass was incorporated into the silica matrix and subsequently removed by calcination. The resulting material was characterized by nitrogen adsorption–desorption analysis, scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC), and its performance for erythrosine red adsorption from aqueous solution was evaluated. The incorporation of the biotemplate modified the pore structure of the silica, decreasing the BET specific surface area from 297.33 to 249.10 m2 g−1 while increasing the average BJH pore diameter from 2.26 to 3.66 nm. Adsorption was favored at pH 6 and rapidly approached equilibrium within approximately 5–7 min. The equilibrium data were satisfactorily described by the Langmuir model, with a maximum adsorption capacity of 108.81 mg g−1 at 25 °C. Adsorption capacity decreased with increasing temperature, and thermodynamic analysis indicated a spontaneous and exothermic process (ΔH° = −8.07 kJ mol−1). Overall, ora-pro-nóbis biomass acted as a renewable porogenic biotemplate, modifying the pore architecture of silica. The resulting TSOPN material exhibited competitive adsorption performance for erythrosine removal.
- Open Access
Enhanced Adsorption of Pb(II) and Cd(II) by Activated Carbon Derived from Peach Stones for Efficient Water Decontamination
This work employed peach stones as the precursor material for producing activated carbon (AC-PS). AC-PS was impregnated with H3PO4 and carbonized using a pyrolysis reactor under a reducing atmosphere. The surface area, average pore size, and total pore volume of AC-PS were determined using the BET method. Morphological characteristics of AC-PS were observed through scanning electron microscopy (SEM), the surface composition was identified by energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) analyses were conducted to determine the crystalline structure of carbon. The thermal stability of AC-PS and its interactions with lead and cadmium were analyzed by thermogravimetric analyses (TGA/DTG) and infrared spectra (FTIR), respectively. The Elovich model described the adsorption kinetics of both lead and cadmium, and the Weber and Morris model indicated intraparticle diffusion as the controlling mechanism of the adsorption process. The equilibrium study showed that the Freundlich model was adequate for both ions, with adsorption capacities increasing with temperature, reaching around 150 mg g−1 for lead and 80 mg g−1 for cadmium at 45 °C. Economic analysis indicated costs of $0.25 g−1 and $0.51 g−1 for the removal of lead and cadmium from the contaminated water, respectively.
Open AccessEnhanced Adsorption of Pb(II) and Cd(II) by Activated Carbon Derived from Peach Stones for Efficient Water Decontamination
This work employed peach stones as the precursor material for producing activated carbon (AC-PS). AC-PS was impregnated with H3PO4 and carbonized using a pyrolysis reactor under a reducing atmosphere. The surface area, average pore size, and total pore volume of AC-PS were determined using the BET method. Morphological characteristics of AC-PS were observed through scanning electron microscopy (SEM), the surface composition was identified by energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) analyses were conducted to determine the crystalline structure of carbon. The thermal stability of AC-PS and its interactions with lead and cadmium were analyzed by thermogravimetric analyses (TGA/DTG) and infrared spectra (FTIR), respectively. The Elovich model described the adsorption kinetics of both lead and cadmium, and the Weber and Morris model indicated intraparticle diffusion as the controlling mechanism of the adsorption process. The equilibrium study showed that the Freundlich model was adequate for both ions, with adsorption capacities increasing with temperature, reaching around 150 mg g−1 for lead and 80 mg g−1 for cadmium at 45 °C. Economic analysis indicated costs of $0.25 g−1 and $0.51 g−1 for the removal of lead and cadmium from the contaminated water, respectively.
- Open Access
Evaluation of the Adsorption Potential of Benzo(a)pyrene in Coal Produced from Sewage Treatment Station Sludge
This work investigates the adsorption of benzo[a]pyrene (BaP) using a charcoal adsorbent derived from sewage treatment plant sludge. BaP is a polycyclic aromatic hydrocarbon (PAH), carcinogenic to humans, which his used by the World Health Organization as a marker for all PAH mixtures. The charcoal was produced by the pyrolysis (500 °C, 4 h) of municipal sewage sludge. The resulting biochar presented mesoporous and oxygenated functional groups that are beneficial for the adsorption of benzo[a]pyrene. The material contained graphitic structures, suggesting potential sites for π–π interactions. The adsorption followed the Elovich kinetic model. A maximum adsorbed value of 60.8 µg g−1 was achieved for an initial BaP concentration of 100 µg L−1 of BaP at 298 K after 20 min. Parameters related to mass transfer phenomena, such as the intraparticle diffusion coefficient, were determined using the homogeneous solid diffusion model (HSDM). These experimental data demonstrate the great potential for computational fluid dynamics (CFD) applications. The value reached for the intraparticle diffusion coefficient was 1.63 × 10−13 m2s−1. Adsorption equilibrium experiments showed that the Langmuir model was most suitable for experimental data, suggesting a monolayer molecular adsorption process. The results showed that charcoal can be employed as an effective material for removing BaP.
Open AccessEvaluation of the Adsorption Potential of Benzo(a)pyrene in Coal Produced from Sewage Treatment Station Sludge
This work investigates the adsorption of benzo[a]pyrene (BaP) using a charcoal adsorbent derived from sewage treatment plant sludge. BaP is a polycyclic aromatic hydrocarbon (PAH), carcinogenic to humans, which his used by the World Health Organization as a marker for all PAH mixtures. The charcoal was produced by the pyrolysis (500 °C, 4 h) of municipal sewage sludge. The resulting biochar presented mesoporous and oxygenated functional groups that are beneficial for the adsorption of benzo[a]pyrene. The material contained graphitic structures, suggesting potential sites for π–π interactions. The adsorption followed the Elovich kinetic model. A maximum adsorbed value of 60.8 µg g−1 was achieved for an initial BaP concentration of 100 µg L−1 of BaP at 298 K after 20 min. Parameters related to mass transfer phenomena, such as the intraparticle diffusion coefficient, were determined using the homogeneous solid diffusion model (HSDM). These experimental data demonstrate the great potential for computational fluid dynamics (CFD) applications. The value reached for the intraparticle diffusion coefficient was 1.63 × 10−13 m2s−1. Adsorption equilibrium experiments showed that the Langmuir model was most suitable for experimental data, suggesting a monolayer molecular adsorption process. The results showed that charcoal can be employed as an effective material for removing BaP.
- 21 February 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (28) , 28436-28443
Biosorption of glycerol impurities from biodiesel production onto electrospun chitosan-based nanofibers: equilibrium and thermodynamic evaluations
The increase in biodiesel production has been leading to an excess amount of crude glycerol and, consequently, serious environmental issues. For this reason, electrospun chitosan-based nanofibers (CB-EN), composed by chitosan and poly(ethylene oxide) (PEO), were synthesized to apply in the biosorption of impurities from industrial glycerol. To evaluate the biosorption efficiency, the chitosan-based nanofiber was compared to other chitosan-based biosorbents (chitosan biopolymeric film and chitosan powder). The equilibrium and thermodynamic studies were successfully performed to comprehend the interaction mechanisms through the biosorption of glycerol pigments onto electrospun chitosan-based nanofibers. The temperature effect was evaluated by experimental equilibrium curves. Freundlich and BET models were used to estimate isotherm parameters. Gibbs free energy change, enthalpy change, entropy change, and isosteric heat of biosorption were quantified. The equilibrium curves showed that the highest equilibrium relative adsorption (340.7 g−1) was reached at 60 °C. The BET model was the most suitable to represent the equilibrium behavior. The thermodynamic parameters indicated that the biosorption was spontaneous, exothermic, random, and energetic heterogeneous. Therefore, this work developed a green and efficient alternative to refine industrial glycerol. Note: This data is mandatory. Please provide
- 21 February 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (28) , 28436-28443
Biosorption of glycerol impurities from biodiesel production onto electrospun chitosan-based nanofibers: equilibrium and thermodynamic evaluations
The increase in biodiesel production has been leading to an excess amount of crude glycerol and, consequently, serious environmental issues. For this reason, electrospun chitosan-based nanofibers (CB-EN), composed by chitosan and poly(ethylene oxide) (PEO), were synthesized to apply in the biosorption of impurities from industrial glycerol. To evaluate the biosorption efficiency, the chitosan-based nanofiber was compared to other chitosan-based biosorbents (chitosan biopolymeric film and chitosan powder). The equilibrium and thermodynamic studies were successfully performed to comprehend the interaction mechanisms through the biosorption of glycerol pigments onto electrospun chitosan-based nanofibers. The temperature effect was evaluated by experimental equilibrium curves. Freundlich and BET models were used to estimate isotherm parameters. Gibbs free energy change, enthalpy change, entropy change, and isosteric heat of biosorption were quantified. The equilibrium curves showed that the highest equilibrium relative adsorption (340.7 g−1) was reached at 60 °C. The BET model was the most suitable to represent the equilibrium behavior. The thermodynamic parameters indicated that the biosorption was spontaneous, exothermic, random, and energetic heterogeneous. Therefore, this work developed a green and efficient alternative to refine industrial glycerol. Note: This data is mandatory. Please provide
- 7 January 2017
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 24 (6) , 5908-5917
Cu(II) adsorption from copper mine water by chitosan films and the matrix effects
Adsorption of copper ions onto chitosan films was studied, and the matrix effect was evaluated using a synthetic solution and a real effluent from closed copper mine. Chitosan films were prepared by casting technique and characterized. The adsorption study was carried out by equilibrium isotherms, thermodynamics, and kinetics. The thermodynamic parameters indicated that the copper adsorption onto chitosan film was favorable, spontaneous, and exothermic, suggesting an increased randomness at the solid/solution interface. The matrix effect was evaluated in kinetic assays, where a synthetic solution and a real system were carried out at different stirring rates. The highest values of adsorption capacity reached in all stirring rates were about 20% lower in the real effluent, and this reduction in the competitiveness was due to the presence of other ions in the matrix of the real effluent. The maximum adsorption capacity of copper ions onto chitosan films for the synthetic solution was of 450 mg g−1, and the removal percentage was in the range from 78 to 96%, and these values for the real effluent were of 360 mg g−1 and removal ranging from 62 to 76%. The mapping done of ions present in the water adsorbed of the mine in the films showed that the same was homogeneously distributed in the films’ surfaces.
- 7 January 2017
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 24 (6) , 5908-5917
Cu(II) adsorption from copper mine water by chitosan films and the matrix effects
Adsorption of copper ions onto chitosan films was studied, and the matrix effect was evaluated using a synthetic solution and a real effluent from closed copper mine. Chitosan films were prepared by casting technique and characterized. The adsorption study was carried out by equilibrium isotherms, thermodynamics, and kinetics. The thermodynamic parameters indicated that the copper adsorption onto chitosan film was favorable, spontaneous, and exothermic, suggesting an increased randomness at the solid/solution interface. The matrix effect was evaluated in kinetic assays, where a synthetic solution and a real system were carried out at different stirring rates. The highest values of adsorption capacity reached in all stirring rates were about 20% lower in the real effluent, and this reduction in the competitiveness was due to the presence of other ions in the matrix of the real effluent. The maximum adsorption capacity of copper ions onto chitosan films for the synthetic solution was of 450 mg g−1, and the removal percentage was in the range from 78 to 96%, and these values for the real effluent were of 360 mg g−1 and removal ranging from 62 to 76%. The mapping done of ions present in the water adsorbed of the mine in the films showed that the same was homogeneously distributed in the films’ surfaces.
- 4 October 2009
- Published by Elsevier in Computer Aided Chemical Engineering
- Vol. 27, 321-326
Adaptive Random Search: A Promising Method for Determining the Stability of Mixtures
- 4 October 2009
- Published by Elsevier in Computer Aided Chemical Engineering
- Vol. 27, 321-326
Adaptive Random Search: A Promising Method for Determining the Stability of Mixtures