Application of Waterborne Acrylic and Solvent-Borne Polyester Coatings on Plasma-Treated Fir (Abies alba M.) Wood
Open Access
Abstract
This research investigates the effect of plasma treatment with air, nitrogen (N2), and carbon dioxide (CO2) gases on the performance of waterborne (acrylic) and solvent-borne (polyester) coated fir (Abies alba M.) wood samples. The properties of the plasma-coated samples were analyzed before and after exposure to accelerated weathering and compared with those of untreated and solely treated ones. According to pull-off testing, the coating adhesion of the wood samples was considerably improved by plasma treatment, and obvious differences were observed between different plasma gases. The effect was more pronounced after the weathering test. Similar results were obtained for the abrasion resistance of the samples. The water contact angle measurement illustrated more hydrophilic character in the solely plasma-treated wood in comparison with the untreated wood. The application of coatings, however, strongly improved its hydrophobic character. The performances of waterborne and solvent-borne coatings on plasma-treated wood were comparable, although slightly better values were obtained by the waterborne system. Our results exhibit the positive effect of plasma treatment on coating performances and the increased weather resistance of the waterborne and solvent-borne coating systems on plasma-treated wood.Keywords
This publication has 39 references indexed in Scilit:
- Influence of air plasma treatment at atmospheric pressure on wood extractivesPolymer Degradation and Stability, 2012
- Electron spectroscopy on plasma treated lignin and celluloseHolzforschung, 2010
- Modification of Sugar Maple (Acer saccharum) and Black Spruce (Picea mariana) Wood Surfaces in a Dielectric Barrier Discharge (DBD) at Atmospheric PressureJournal of Adhesion Science and Technology, 2010
- Surface modification of PE film by DBD plasma in airApplied Surface Science, 2008
- Modification of surface properties of high and low density polyethylene by Ar plasma dischargePolymer Degradation and Stability, 2006
- Kinetics and mechanism of the sensitized photodegradation of lignin model compoundsPhotochemical & Photobiological Sciences, 2005
- Adhesion of calcium phosphate ceramic on polyethylene (PE) and polytetrafluoroethylene (PTFE)Surface and Coatings Technology, 2004
- Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesionInternational Journal of Adhesion and Adhesives, 2004
- Plasma surface modification of polyethyleneColloids and Surfaces A: Physicochemical and Engineering Aspects, 2003
- Activation of wood surface by corona treatment to improve adhesive bondingJournal of Applied Polymer Science, 1993