Enhanced SOFC Cathode Performance Through Surface Modification of NdBa0.5Sr0.5Co2O5+δ Nanoparticles
Author:
Open Access
- 29 November 2022
- journal article
- research article
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Jurnal Kimia Sains dan Aplikasi
- Vol. 25 (9) , 322-328
Abstract
The cathode materials fabrication with outstanding performance and stability at intermediate temperatures of 600–800℃ is required for the prospective mass production of solid oxide fuel cells (SOFCs). Infiltration is a potential method because it has proven successful in fabrication and cell performance enhancement. This study mainly focuses on the electrical conductivity and long-term reliability of cathode symmetric cells NdBa0.5Sr0.5Co2O5+δ (NBSC) fabricated by traditional solid-state reaction techniques. The electrical conductivity value of the cathode is in the range of 174–278 S.cm-1. Impedance analysis showed that the infiltration of 0.5M SDC on the NBSC cathode surface dramatically reduced the polarization resistance (Rp) between layers (cathode-electrolyte) from 3.32 Ω.cm2 to 1.82 Ω.cm2 at 600℃ or decreased by 45 % compared to NBSC cathode without 0.5M SDC infiltration. The enhanced stability of NBSC cathode specimens with 0.5M SDC infiltration (NBSC+0.5 M SDC) under SOFC operating conditions proves that samples with infiltration extend their lifetime. Compared to the NBSC cathode, the NBSC+0.5 M SDC cathode has better long-term stability with a lower RP value of 2.35 Ω.cm2. In the OPP range of 0.214-0.0027 atm at 800℃, the relatively tiny Rp value of the symmetrical cell is between 0.030 Ω.cm2 and 0.039 Ω.cm2, below the 0.15 Ω.cm2 suitable performance limit for solid oxide fuel cells.Keywords
This publication has 34 references indexed in Scilit:
- Chemical bulk diffusion coefficient of Sm0.5Sr0.5CoO3−δ cathode for solid oxide fuel cellsJournal of Power Sources, 2013
- Layered LnBa1−xSrxCoCuO5+δ (Ln = Nd and Gd) perovskite cathodes for intermediate temperature solid oxide fuel cellsInternational Journal of Hydrogen Energy, 2013
- Characterization of novel GdBa0.5Sr0.5Co2−xFexO5+δ perovskites for application in IT-SOFC cellsInternational Journal of Hydrogen Energy, 2013
- Composite cathodes composed of NdBa0.5Sr0.5Co2O5+δand Ce0.9Gd0.1O1.95for intermediate-temperature solid oxidefuel cellsJournal of Materials Chemistry A, 2012
- Crystal chemistry and properties of mixed ionic-electronic conductorsJournal of Electroceramics, 2011
- Electrochemical performances of NdBa0.5Sr0.5Co2O5+ as potential cathode material for intermediate-temperature solid oxide fuel cellsJournal of Power Sources, 2010
- La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes infiltrated with samarium-doped cerium oxide for solid oxide fuel cellsJournal of Power Sources, 2010
- Contribution of fuel cell systems to CO2 emission reduction in their application fieldsRenewable and Sustainable Energy Reviews, 2010
- Preparation and characterization of Pr1−xSrxFeO3 cathode material for intermediate temperature solid oxide fuel cellsJournal of Power Sources, 2007
- Bismuth-Ruthenate-Based Cathodes for IT-SOFCsJournal of the Electrochemical Society, 2005