Two-Dimensional Thermal Stress Analysis in Adhesive Butt Joints Containing Hole Defects and Rigid Fillers in Adhesive Under Non-Uniform Temperature Field
Authors:
- 1 January 1998
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 65 (1-4) , 57-80
Abstract
This study is concerned with the thermal stress analysis of an adhesive butt joint which contains circular holes and rigid fillers in an adhesive and is under a non-uniform temperature field. In the analysis, the adherends are assumed to be rigid and the adhesive is replaced with a finite strip having holes and rigid fillers in it and the thermal stress distribution in the adhesive is analyzed using a two-dimensional theory of elasticity. The effects of size and location of the circular holes and rigid fillers on the stress distributions at the interface and at the hole and filler peripheries are clarified by numerical calculations. For verification, photoelastic experiments were performed using an epoxide resin plate with small holes and fillers in it, to model and adhesive in the joint. The analytical results are fairly consistent with the experimental ones.Keywords
This publication has 7 references indexed in Scilit:
- The Effect of Temperature on the Strength of Adhesively-Bonded Composite-Aluminium JointsThe Journal of Adhesion, 1993
- A Two-dimensional Stress Analysis of Butt Adhesive Joints Having a Circular Hole Defect in the Adhesive Subjected to External Bending MomentsThe Journal of Adhesion, 1991
- The Fracture Behaviour of a Rubber-Modified Epoxy Under Impact FatigueThe Journal of Adhesion, 1990
- Stress Distribution in Plane Scarf and Butt JointsJournal of Applied Mechanics, 1990
- Improved Matrix-Filler AdhesionThe Journal of Adhesion, 1985
- Analysis of Adhesively Bonded Joints Between Panels of Composite MaterialsJournal of Applied Mechanics, 1977
- Two Edge-Bonded Elastic Wedges of Different Materials and Wedge Angles Under Surface TractionsJournal of Applied Mechanics, 1971