Abstract
Acoustic metasurfaces based on Helmholtz resonators commonly achieve phase control through geometric variations, which can limit structural flexibility and adaptability. In this study, we propose and experimentally validate a new phase-generation mechanism enabled by rotational internal partitions embedded within Helmholtz resonators. By rotating the internal partition, the effective acoustic path inside the resonator cavity is modified, producing a controllable phase shift in the transmitted wave while preserving the external geometry of the unit cell. Finite element simulations establish a clear relationship among partition angle, phase shift, and transmission characteristics at 5500 Hz, demonstrating substantial phase modulation with relatively high transmission efficiency.Based on the derived angle–phase mapping, metasurfaces with prescribed phase gradients are designed to realize representative acoustic functionalities, including focusing and directed refraction. Although the current configuration does not achieve full 2π phase coverage, the available phase variation is sufficient to produce effective wavefront manipulation. Numerical results demonstrate clear acoustic focusing and directional refraction through appropriate partition-angle distributions. A focusing metasurface was further fabricated using three-dimensional printing and tested in a customized impedance chamber. The experimental measurements show good agreement with the simulations, confirming the feasibility of the proposed rotation-induced phase-control mechanism. This work establishes rotational-partition Helmholtz resonators as physically intuitive and structurally efficient phase-control elements, providing a promising foundation for multifunctional and potentially mechanically reconfigurable acoustic metasurfaces.

This publication has 14 references indexed in Scilit: