Integrated long‐term multifunctional pediatric mechanical circulatory assist device
- 29 December 2020
- journal article
- research article
- Published by Wiley in Artificial Organs
- Vol. 45 (5) , E65-E78
Abstract
There continues to be limited, viable ventricular assist device technology options to support the dysfunctional states of pediatric heart failure. To address this need, we are developing a magnetically suspended, versatile pumping technology that uniquely integrates two blood pumps in a series configuration within a single device housing. This device enables operational switching from the usage of one pump to another as needed for clinical management or to support growth and development of the pediatric patient. Here, we present the initial design where we conducted a virtual fit study, the Taguchi Design Optimization Method, iterative design to develop pump geometries. Computational tools were used to estimate the pressure generation, capacity delivery, hydraulic efficiency, fluid stress levels, exposure time to stresses, blood damage index, and fluid forces on the impellers. Prototypes of the pumps were tested in a flow loop using a water‐glycerin solution. Both designs demonstrated the capability to generate target pressures and flows. Blood damage estimations were below threshold levels and achieved design requirements; however, maximum scalar stress levels were above the target limit. Radial and axial forces were less than 1 N and 10 N, respectively. The performance data trends for physical prototypes correlated with theoretical expectations. The centrifugal prototype was able to generate slightly higher pressure rises than numerical predictions. In contrast, the axial prototype outperformed the computational studies. Experimental data were both repeatable and reproducible. The findings from this research are promising, and development will continue.Keywords
Funding Information
- Hartwell Foundation (2016 Individual Biomedical Research Award)
This publication has 30 references indexed in Scilit:
- Pediatric Ventricular Assist DevicesPediatric Critical Care Medicine, 2013
- A Quantitative Comparison of Mechanical Blood Damage Parameters in Rotary Ventricular Assist Devices: Shear Stress, Exposure Time and Hemolysis IndexJournal of Biomechanical Engineering, 2012
- Numerical Design and Performance Prediction of Low Specific Speed Centrifugal Pump ImpellerInternational Journal of Fluid Machinery and Systems, 2011
- Parametric Study of a Centrifugal Pump Impeller by Varying the Outlet Blade AngleThe Open Mechanical Engineering Journal, 2008
- Pediatric Circulatory Support: Current Strategies and Future Directions. Biventricular and Univentricular Mechanical AssistanceASAIO Journal, 2008
- CFD Analysis of a Mag-Lev Ventricular Assist Device for Infants and Children: Fourth Generation DesignASAIO Journal, 2008
- Design Optimization of an Axial Blood Pump With Computational Fluid DynamicsASAIO Journal, 2008
- Numerical Design and Experimental Hydraulic Testing of an Axial Flow Ventricular Assist Device for Infants and ChildrenASAIO Journal, 2007
- Long-Term Use of a Left Ventricular Assist Device for End-Stage Heart FailureNew England Journal of Medicine, 2001
- Mechanical left ventricular support as a bridge to cardiac transplantation in childhoodEuropean Journal of Cardio-Thoracic Surgery, 1991