Design of a side coupled standing wave accelerating tube for NSTRI e-Linac
- 1 September 2017
- journal article
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 12 (9) , P09026
Abstract
The design and construction of a 6 MeV electron linear accelerator (e-Linac) was defined in the Institute of Nuclear Science and Technology (NSTRI) for cargo inspection and medical applications. For this accelerator, a side coupled standing wave tube resonant at a frequency of 2998.5 MHZ in π/2 mode was selected. In this article, the authors provide a step-by-step explanation of the process of the design for this tube. The design and simulation of the accelerating and coupling cavities were carried out in five steps; (1) separate design of the accelerating and coupling cavities, (2) design of the coupling aperture between the cavities, (3) design of the entire structure for resonance at the nominal frequency, (4) design of the buncher, and (5) design of the power coupling port. At all design stages, in addition to finding the dimensions of the cavity, the impact of construction tolerances and simulation errors on the electromagnetic parameters were investigated. The values obtained for the coupling coefficient, coupling constant, quality factor and capture efficiency are 2.11, 0.011, 16203 and 36%, respectively. The results of beam dynamics study of the simulated tube in ASTRA have yielded a value of 5.14 π-mm-mrad for the horizontal emittance, 5.06 π-mm-mrad for the vertical emittance, 1.17 mm for the horizontal beam size, 1.16 mm for the vertical beam size and 1090 keV for the energy spread of the output beam.Keywords
This publication has 9 references indexed in Scilit:
- Investigation of using shrinking method in construction of Institute for Research in Fundamental Sciences Electron Linear Accelerator TW-tube (IPM TW-Linac tube)Journal of Instrumentation, 2015
- Design, construction and tuning of S-band coupler for electron linear accelerator of institute for research in fundamental sciences (IPM E-linac)Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2015
- Beam dynamics studies of a 10 MeV standing wave electron linac2014
- Beam dynamics studies and parametric characterization of a standing wave electron linacJournal of Instrumentation, 2013
- Design of RF feed system and cavities for standing-wave accelerator structureNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2011
- The design of a simulated in‐line side‐coupled 6 MV linear accelerator waveguideMedical Physics, 2010
- RF Linear Accelerators2008
- Computer simulation and cold model testing of CCL cavities2002
- Generalization of linac mode spectrum and fitting procedureReview of Scientific Instruments, 1992