Influence of Trapped Gas on Pore Healing under Hot Isostatic Pressing in Nickel-Base Superalloys
Open Access
Abstract
Under the typical hot isostatic pressing (HIP) processing conditions, plastic deformation by dislocation slip is considered the primary mechanism for pore shrinkage, according to experimental observations and deformation mechanism maps. In the present work, a crystal plasticity model has been used to investigate the influence of applied pressure and holding time on porosity reduction in a nickel-base single crystal superalloy. The influence of trapped gas on pore shrinkage is modeled by coupling mechanical deformation with pore–gas interaction. In qualitative agreement with experimental investigations, we observe that increasing the applied pressure or the holding time can effectively reduce porosity. Furthermore, the effect of pore shape on the shrinkage is observed to depend on a combination of elastic anisotropy and the complex distribution of stresses around the pore. Simulation results also reveal that, for pores of the same shape, smaller pores (radius < 0.1 μm) have a higher shrinkage rate in comparison to larger pores (radius ≥ 0.1 μm), which is attributed to the increasing pore surface energies with decreasing pore sizes. It is also found that, for smaller initial gas-filled pores (radius < 0.1 μm), HIP can result in very high gas pressures (on the order of GPa). Such high pressures either act as a driving force for argon to diffuse into the surrounding metal during HIP itself, or it can result in pore re-opening during subsequent annealing or mechanical loading. These results demonstrate that the micromechanical model can quantitatively evaluate the individual influences of HIP processing conditions and pore characteristics on pore annihilation, which can help optimize the HIP process parameters in the future.Keywords
This publication has 29 references indexed in Scilit:
- Model for the porosity growth in single-crystal nickel-base superalloys during homogenizationScripta Materialia, 2007
- Miniature Specimen Assessment of Creep of the Single-Crystal Superalloy LEK 94 in the 1000 °C Temperature RangeMetallurgical and Materials Transactions A, 2007
- Effect of HIP process on the micro-structural evolution of a nickel-based superalloyMaterials Science and Engineering: A, 2006
- Synchrotron tomography of porosity in single-crystal nickel-base superalloysMaterials Science and Engineering: A, 2006
- Influence of hot isostatic pressing on the fracture transitions in the fine grain MAR-M247 superalloysMaterials Chemistry and Physics, 2004
- Influence of solidification variables on the microstructure, macrosegregation, and porosity of directionally solidified Mar-M247Materials Science and Engineering: A, 2001
- Fundamental aspects of hot isostatic pressing: An overviewMetallurgical and Materials Transactions A, 2000
- Mechanisms of Deformation and Fracture1983
- Elastic-Plastic Deformation at Finite StrainsJournal of Applied Mechanics, 1969
- SELF-DIFFUSION IN POLYCRYSTALLINE NICKELCanadian Journal of Chemistry, 1959