Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Napat Vajragupta has a total of 127 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Data-oriented description of texture-dependent anisotropic material behavior

    by Jan Schmidt, Abhishek Biswas, Napat Vajragupta, Alexander Hartmaier

    In metallurgical processes, as for example cold rolling or deep drawing of sheet metal, it is frequently observed that the crystallographic texture, and with it the anisotropic mechanical properties of a material, evolve dynamically. Hence, to describe such processes, it is necessary to model the functional dependence of anisotropic material parameters on the texture, which itself can vary locally with the different plastic strain histories. In this work, we present a new data-oriented approach to parametrize the anisotropic yield function Barlat Yld2004-18p from micromechanical simulations for different textures. This is accomplished by applying supervised machine learning (ML) methods to express the relationship between different crystallographic textures and the material parameters of the yield function. The crystallographic textures are chosen to vary continuously between a random texture on the one hand side, and a unimodal Goss or Copper texture the other. These crystallographic textures are rather common in sheet metal forming. In this way, furthermore, the transition from isotropic plasticity to a rather severe case of anisotropy can be modeled, which is thought to mimic the dynamical evolution of the texture in a metallurgical process. It is found that a regularization strategy is necessary to circumvent the known non-uniqueness between Yld2004-18p parameters and the resulting plastic yield behavior. After this regularization, a unique relationship between the material parameters and the yield onset is established, making it possible to train different ML models with excellent accuracy and generalization properties to anisotropic plastic material behavior. The trained ML models are able to reliably predict the coefficients of unknown textures even with a small amount of training data and, thus, to correctly represent the yield behavior resulting from the various textures. The proposed method represents an efficient extension of the description of anisotropic plastic yielding as it establishes a data-oriented way to explicitly consider microstructural parameters in the material description, which opens new pathways to formulate material models that include the process history.


  • Open Access

    Identification of texture characteristics for improved creep behavior of a L-PBF fabricated IN738 alloy through micromechanical simulations

    by Mahesh R G Prasad, Abhishek Biswas, Napat Vajragupta, Alexander Hartmaier

    Additive manufacturing (AM) of nickel-based superalloys, due to high temperature gradients during the building process, typically promotes epitaxial growth of columnar grains with strong crystallographic texture in form of a 〈001〉 fibre or a cube texture. Understanding the mutual dependency between AM process parameters, the resulting microstructure and the effective mechanical properties of the material is of great importance to accelerate the development of the manufacturing process. In this work, a multi-scale micromechanical model is employed to gain deeper insight into the influence of various texture characteristics on the creep behavior of an IN738 superalloy. The creep response is characterized using a phenomenological crystal plasticity creep model that considers the characteristic γ–γ′ microstructure and all active deformation mechanisms. The results reveal that the creep strength increases with decreasing texture intensities and reaches its maximum when the 〈001〉 fibre and cube textures are misaligned to the specimen building direction by 45°. The simulations also predict that the uncommon 〈111〉 and 〈110〉 fibres offer significantly higher creep resistance than the typically observed 〈001〉 fibre, which provides a further incentive to investigate AM processing conditions that can produce these unique textures in the material. As the intensities and the alignment of 〈001〉 fibre and cube textures can be attributed to the laser energy density and the scan strategy employed and as the formation of distinct fibre textures depends on the geometry of the resulting melt pool, the laser powder bed fusion process parameters can be optimized to obtain microstructures with features that improve the creep properties.


  • Effect of microstructure heterogeneity on the mechanical properties of friction stir welded reduced activation ferritic/martensitic steel

    by Shengli Li, Napat Vajragupta, Abhishek Biswas, Wenshen Tang, Hao Wang, Aleksander Kostka, Xinqi Yang, Alexander Hartmaier


  • Open Access

    Influence of Crystal Plasticity Parameters on the Strain Hardening Behavior of Polycrystals

    by Mahdieh Shahmardani, Napat Vajragupta, Alexander Hartmaier

    The effective mechanical properties of a polycrystal depend directly on the single-crystal properties of each grain and its crystallographic orientation with respect to the load axis. While the micromechanical approach has been used quite extensively to study the influence of grain shape and crystallographic texture on the resulting mechanical behavior of a polycrystal, the influence of the crystal plasticity parameters, which describe the constitutive behavior of the single crystal, requires to be investigated systemically because, typically, these parameters are fitted to describe a given material behavior. In the current research, this gap is filled by systemically studying the effect of changes in crystal plasticity parameters on the effective mechanical properties of polycrystals. The numerical model employed here consists of a representative volume element of 100 grains, and the material properties are described by using a non-local crystal plasticity model. A proper homogenization technique was used to homogenize the micromechanical results to an effective macroscopic material response. The equivalent stress versus equivalent plastic strain curve was obtained numerically by introducing the Voce-type hardening law, mimicking the material behavior in uniaxial tensile tests. The four parameters of the Voce-type hardening law were fitted to the macroscopic stress-strain curves, and the correlation between the crystal plasticity parameters and the Voce parameters has been studied, which is an efficient way to study the influence of microscopic material descriptions on the macroscopic behavior of polycrystals.


  • Open Access

    Finite Element Modeling of Brittle and Ductile Modes in Cutting of 3C-SiC

    by Masud Alam, Liang Zhao, Napat Vajragupta, Junjie Zhang, Alexander Hartmaier

    Machining of brittle ceramics is a challenging task because the requirements on the cutting tools are extremely high and the quality of the machined surface strongly depends on the chosen process parameters. Typically, the efficiency of a machining process increases with the depth of cut or the feed rate of the tool. However, for brittle ceramics, this easily results in very rough surfaces or even in crack formation. The transition from a smooth surface obtained for small depths of cut to a rough surface for larger depths of cut is called a brittle-to-ductile transition in machining. In this work, we investigate the mechanisms of this brittle-to-ductile transition for diamond cutting of an intrinsically brittle 3C-SiC ceramic with finite element modeling. The Drucker–Prager model has been used to describe plastic deformation of the material and the material parameters have been determined by an inverse method to match the deformation behavior of the material under nanoindentation, which is a similar loading state as the one occurring during cutting. Furthermore, a damage model has been introduced to describe material separation during the machining process and also crack initiation in subsurface regions. With this model, grooving simulations of 3C-SiC with a diamond tool have been performed and the deformation and damage mechanisms have been analyzed. Our results reveal a distinct transition between ductile and brittle cutting modes as a function of the depth of cut. The critical depth of cut for this transition is found to be independent of rake angle; however, the surface roughness strongly depends on the rake angle of the tool.


  • Open Access

    Deformation and Damage Assessments of Two DP1000 Steels Using a Micromechanical Modelling Method

    by Niloufar Habibi, Napat Vajragupta, Sebastian Münstermann

    Damage characterization and micromechanical modelling in dual-phase (DP) steels have recently drawn attention, since any changes in the alloying elements or process route strongly influence the microstructural features, deformation behavior of the phases, and damage to the micro-mechanisms, and subsequently the particular mechanical properties of the material. This approach can be used to stablish microstructure–properties relationships. For instance, the effects of local damage from shear cutting on edge crack sensitivity in the following deformation process can be studied. This work evaluated the deformation and damage behaviors of two DP1000 steels using a microstructure-based approach to estimate the edge cracking resistance. Phase fraction, grain size, phase distribution, and texture were analyzed using electron backscatter diffraction and secondary electron detectors of a scanning electron microscope and employed in 3D representative volume elements. The deformation behavior of the ferrite phase was defined using a crystal plasticity model, which was calibrated through nanoindentation tests. Various loading conditions, including uniaxial tension, equi-biaxial tension, plane strain tension, and shearing, along with the maximum shear stress criterion were applied to investigate the damage initiation and describe the edge cracking sensitivity of the studied steels. The results revealed that a homogenous microstructure leads to homogenous stress–strain partitioning, delayed damage initiation, and high edge cracking resistance.


  • Open Access

    Influence of Temperature on Void Collapse in Single Crystal Nickel under Hydrostatic Compression

    by Mahesh R. G. Prasad, Anupam Neogi, Napat Vajragupta, Rebecca Janisch, Alexander Hartmaier

    Employing atomistic simulations, we investigated the void collapse mechanisms in single crystal Ni during hydrostatic compression and explored how the atomistic mechanisms of void collapse are influenced by temperature. Our results suggest that the emission and associated mutual interactions of dislocation loops around the void is the primary mechanism of void collapse, irrespective of the temperature. The rate of void collapse is almost insensitive to the temperature, and the process is not thermally activated until a high temperature (∼1200–1500 K) is reached. Our simulations reveal that, at elevated temperatures, dislocation motion is assisted by vacancy diffusion and consequently the void is observed to collapse continuously without showing appreciable strain hardening around it. In contrast, at low and ambient temperatures (1 and 300 K), void collapse is delayed after an initial stage of closure due to significant strain hardening around the void. Furthermore, we observe that the dislocation network produced during void collapse remains the sample even after complete void collapse, as was observed in a recent experiment of nickel-base superalloy after hot isostatic pressing.


  • Open Access

    Influence of Trapped Gas on Pore Healing under Hot Isostatic Pressing in Nickel-Base Superalloys

    by Mahesh R. G. Prasad, Siwen Gao, Napat Vajragupta, Alexander Hartmaier

    Under the typical hot isostatic pressing (HIP) processing conditions, plastic deformation by dislocation slip is considered the primary mechanism for pore shrinkage, according to experimental observations and deformation mechanism maps. In the present work, a crystal plasticity model has been used to investigate the influence of applied pressure and holding time on porosity reduction in a nickel-base single crystal superalloy. The influence of trapped gas on pore shrinkage is modeled by coupling mechanical deformation with pore–gas interaction. In qualitative agreement with experimental investigations, we observe that increasing the applied pressure or the holding time can effectively reduce porosity. Furthermore, the effect of pore shape on the shrinkage is observed to depend on a combination of elastic anisotropy and the complex distribution of stresses around the pore. Simulation results also reveal that, for pores of the same shape, smaller pores (radius < 0.1 μm) have a higher shrinkage rate in comparison to larger pores (radius ≥ 0.1 μm), which is attributed to the increasing pore surface energies with decreasing pore sizes. It is also found that, for smaller initial gas-filled pores (radius < 0.1 μm), HIP can result in very high gas pressures (on the order of GPa). Such high pressures either act as a driving force for argon to diffuse into the surrounding metal during HIP itself, or it can result in pore re-opening during subsequent annealing or mechanical loading. These results demonstrate that the micromechanical model can quantitatively evaluate the individual influences of HIP processing conditions and pore characteristics on pore annihilation, which can help optimize the HIP process parameters in the future.


  • Open Access

    Effect of Grain Statistics on Micromechanical Modeling: The Example of Additively Manufactured Materials Examined by Electron Backscatter Diffraction

    by Abhishek Biswas, Mahesh R. G. Prasad, Napat Vajragupta, Aleksander Kostka, Thomas Niendorf, Alexander Hartmaier

    Micromechanical modeling is one of the prominent numerical tools for the prediction of mechanical properties and the understanding of deformation mechanisms of metals. As input parameters, it uses data obtained from microstructure characterization techniques, among which the electron backscatter diffraction (EBSD) technique allows us to understand the nature of microstructural features, that are usually described by statistics. Because of these advantages, the EBSD dataset is widely used for synthetic microstructure generation. However, for the statistical description of microstructural features, the population of input data must be considered. Preferably, the EBSD measurement area must be sufficiently large to cover an adequate number of grains. However, a comprehensive study of this measurement area with a crystal plasticity finite element method (CPFEM) framework is still missing although it would considerably facilitate information exchange between experimentalists and simulation experts. Herein, the influence of the EBSD measurement area and the number of grains on the statistical description of the microstructural features and studying the corresponding micromechanical simulation results for 316L stainless steel samples produced by selective laser melting is investigated.