Investigation of the bending and quasi‐static indentation properties of three‐dimensional (3D) textile‐reinforced composites
Open Access
- 2 November 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (2) , 1703-1714
Abstract
The three‐dimensional (3D) textiles, which are identified as advanced fabric systems, have been under development for decades and are demanded for number of structural or semi‐structural applications. They can be obtained by several production methods. These methods impart distinct, specific properties to the 3D textiles and their composites. However, the discrepancies in the production methods and their effects on the dry structure and composite mechanics need to be elucidated. In this study, the compressibility and bending properties of 3D woven, 3D multiaxis warp knitted, and 3D stitched fabrics were determined. Afterward, their composites were produced and tested under three‐point bending and quasi‐static indentation loads. Therefore, the load bearing capacity of 3D textiles was investigated from the dry structure to the composite. According to the purpose of the end‐uses, significant differences were obtained in their mechanical behaviors. When the indentation properties and damage mechanism are taken into consideration, the 3D woven composite shows the best performance among all composites.Highlights: Quadriaxial oriented low crimp carbon yarns gain the best quasi‐static indentation resistance to composites. The stitching process prevents damage progress in composites and restrains smaller areas. Binding warp yarn enables the composite distribute indentation energy more evenly.Keywords
This publication has 27 references indexed in Scilit:
- A comparative study on the tensile properties and failure mechanism of 3D MWK composites at room and liquid nitrogen temperaturePolymer Composites, 2013
- Three‐dimensional nonwoven flax fiber reinforced polylactic acid biocompositesPolymer Composites, 2013
- Quasi-static tensile behavior and damage of carbon/epoxy composite reinforced with 3D non-crimp orthogonal woven fabricMechanics of Materials, 2013
- Multiscale damage modelling of 3D weave composite by asymptotic homogenisationComposite Structures, 2013
- A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned compositesComposites Part A: Applied Science and Manufacturing, 2010
- A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 1: Materials, methods and principal resultsComposites Part A: Applied Science and Manufacturing, 2009
- Review of z-pinned composite laminatesComposites Part A: Applied Science and Manufacturing, 2007
- Abrasion resistance of thermally bonded 3D nonwoven fabricsWear, 2007
- Effect of Fabric Structures on the Mechanical Properties of 3-D Textile CompositesJournal of Industrial Textiles, 2006
- Three‐dimensionally woven and braided composites. II: An experimental characterizationPolymer Composites, 1999