Coupled structural and heat conduction FE analysis of laminated high damping rubber bearing
- 18 May 2021
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 50 (9) , 2462-2487
Abstract
A framework for coupled structural and heat conduction finite element analysis is developed for laminated high damping rubber bearings (HDRBs), and coupled analyses are conducted for full‐scale tests of an HDRB using the shaking table at E‐Defense. An HDRB, which is used in base‐isolated buildings, is modeled using hexahedral solid elements. The high damping rubber is modeled as an overlaid viscohyperelastic and elastic‐plastic constitutive model. However, material parameters are identified using the results for the HDRB subjected to one‐directional loading, and temperature dependences of the parameters are taken into account by a simple method based on empirical formulae for the HDRB because no cyclic coupon test was conducted for the high damping rubber used in the full‐scale tests. The combined structural and heat conduction analyses are conducted for a number of loading cases. The same hexahedral mesh of the HDRB is used for both structural and heat conduction analyses. Analysis results are presented for a one‐directional cyclic loading test, two‐directional loading test with elliptical orbit, and earthquake loading test. The results obtained by the tests and those obtained by the coupled structural and heat conduction analyses are compared. The coupling effect of the mechanical and thermal behaviors is clearly shown in the analysis results, although reductions of the equivalent stiffness and damping are not large because the number of loading cycles in the present analyses is limited.Keywords
This publication has 30 references indexed in Scilit:
- Effects of air temperature on the cyclic behavior of elastomeric seismic isolatorsBulletin of Earthquake Engineering, 2011
- Modeling strength degradation in lead–rubber bearings under earthquake shakingEarthquake Engineering & Structural Dynamics, 2010
- EVALUATION OF THE INFLUENCE OF HEAT-MECHANICS INTERACTION BEHAVIOR IN HIGH-DAMPING RUBBER BEARINGS ON SEISMIC RESPONSE OF BASE-ISOLATED BUILDINGSJournal of Structural and Construction Engineering (Transactions of AIJ), 2010
- High‐precision finite element analysis of elastoplastic dynamic responses of super‐high‐rise steel framesEarthquake Engineering & Structural Dynamics, 2009
- EXPERIMENTAL STUDY ON HEAT-MECHANICS INTERACTION BEHAVIOR OF LAMINATED RUBBER BEARINGSJournal of Structural and Construction Engineering (Transactions of AIJ), 2009
- Superimposed finite elastic–viscoelastic–plastoelastic stress response with damage in filled rubbery polymers. Experiments, modelling and algorithmic implementationJournal of the Mechanics and Physics of Solids, 2000
- Geometrically non‐linear enhanced strain mixed methods and the method of incompatible modesInternational Journal for Numerical Methods in Engineering, 1992
- On a fully three-dimensional finite-strain viscoelastic damage model: Formulation and computational aspectsComputer Methods in Applied Mechanics and Engineering, 1987
- An excursion into large rotationsComputer Methods in Applied Mechanics and Engineering, 1982
- Large deformation isotropic elasticity: on the correlation of theory and experiment for compressible rubberlike solidsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1972