Effects of mixing sequence on epoxy/polyether polyol/organoclay ternary nanocomposites
- 14 May 2020
- journal article
- research article
- Published by SAGE Publications in Plastics, Rubber and Composites: Macromolecular Engineering
- Vol. 49 (8) , 368-377
Abstract
The effects of mixing sequence of the polyether polyol and curing agent (triethylenetetramine) on mechanical and thermal properties and morphology of epoxy/polyether polyol/organoclay ternary nanocomposites are investigated in this study. The polyether polyol domain size data are relatively unchanged with mixing order both in epoxy/polyether polyol blends and in ternary nanocomposites. Generally, impact strength data of the ternary nanocomposites prepared by the second addition order are higher than the ones produced by the first addition order. Flexural strength and strain at break may be accepted as unaltered generally for the ternary nanocomposites with respect to addition order. Except for the sample containing 3 wt-% Cloisite ® 30B and 3 wt. % polyether polyol, flexural modulus data are close to each other in ternary nanocomposites. The highest flexural modulus is obtained for the 5 wt-% Cloisite ® 30B and 3 wt-% polyether polyol sample prepared by the second addition order, as 2978 ± 27 MPa.Keywords
This publication has 51 references indexed in Scilit:
- Epoxy/Polyurethane/Clay Ternary Nanocomposites – Effect of Components Mixing Sequence on the Composites PropertiesPolymer-Plastics Technology and Engineering, 2012
- Impact modified epoxy/montmorillonite nanocomposites: synthesis and characterizationPolymer, 2003
- Synthesis and properties of epoxy resin modified with epoxy-terminated liquid polybutadienePolymer, 2003
- Flexibility improvement of epoxy resin by liquid rubber modificationPolymer International, 2002
- Morphology, thermal relaxations and mechanical properties of layered silicate nanocomposites based upon high-functionality epoxy resinsPolymer, 2002
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000
- Modeling the Interactions between Polymers and Clay Surfaces through Self-Consistent Field TheoryMacromolecules, 1998
- Effects of morphology on toughening of tetrafunctional epoxy resins with poly(ether imide)Polymer, 1993
- Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxiesJournal of Materials Science, 1991
- Miscibility and kinetics of phase separation in blends of poly(ethylene oxide) and poly(ether sulphone)Polymer, 1991