Quantitative analysis of powder samples using screen-printing techniques as sample preparation methods for LA-ICP-MS
- 1 August 2023
- journal article
- research article
- Published by Springer Nature in Analytical Sciences
- Vol. 39 (10) , 1757-1762
Abstract
The combination of laser ablation and inductively coupled plasma mass spectrometry (LA-ICP-MS) offers a powerful tool for directly analyzing solid samples. However, LA-ICP-MS has a limitation in quantitative analyses owing to a requirement for matrix-matched standard materials. In this study, we have developed a sample preparation method that facilitates quantitative analyses by LA-ICP-MS. The sample powder is dispersed in a liquid resin and film-like samples are prepared from the resulting paste by a screen-printing technique. The sample includes the analyte spiked with internal standards and is prepared by mixing standard solutions in the sample paste. Because all reagents except for the sample powder are liquids, homogeneous samples can be easily obtained. The internal standard and concentration of the spiked analyte can be tailored for each sample, which is a requirement for accurate quantitative analyses. The amount of sample and concentration of the spiked analyte are controlled against an internal standard, enabling internal standardization without the need to have an element of known concentration in the sample. The accuracy of this method was evaluated by analyzing impurity elements in TiO2 powder; however, it is expected that other materials could also be analyzed. The versatility and flexibility of this method suggest great potential for quantitative analyses by LA-ICP-MS, for which reliable matrix-matched standard materials are required. Graphical abstractKeywords
This publication has 12 references indexed in Scilit:
- Recent advances in quantitative LA-ICP-MS analysis: challenges and solutions in the life sciences and environmental chemistryAnalytical and Bioanalytical Chemistry, 2015
- Current approaches to calibration of LA-ICP-MS analysisJournal of Analytical Atomic Spectrometry, 2014
- Determination of Reference Values for NIST SRM 610–617 Glasses Following ISO GuidelinesGeostandards and Geoanalytical Research, 2011
- Review of the State-of-the-Art of Laser Ablation Inductively Coupled Plasma Mass SpectrometryApplied Spectroscopy, 2011
- Direct analysis of solid samples by fs-LA-ICP-MSTrAC Trends in Analytical Chemistry, 2007
- Laser Ablation and Low-Pressure Helium-ICP-MS for the Analysis of Alumina Powder Dispersed in GlycerolAnalytical Sciences, 2005
- Femtosecond laser ablation ICP-MSJournal of Analytical Atomic Spectrometry, 2002
- Application of a frequency quintupled Nd:YAG source (λ=213 nm) for laser ablation inductively coupled plasma mass spectrometric analysis of mineralsJournal of Analytical Atomic Spectrometry, 1998
- Capabilities of an Argon Fluoride 193 nm Excimer Laser for Laser Ablation Inductively Coupled Plasma Mass Spectometry Microanalysis of Geological MaterialsJournal of Analytical Atomic Spectrometry, 1997
- Solid sample introduction by laser ablation for inductively coupled plasma source mass spectrometryThe Analyst, 1985