Closed-Loop Process of Extracting and Separating Zinc Impurities from Industrial Cobalt Products—Pilot Test Study
Open Access
Abstract
The cobalt-containing products of an enterprise were selected as the object of this study. The separation effect of Cyanex 272 on Zn and Co was studied through a pilot test. The results showed that Cyanex 272 had a high extraction rate for Zn at pH 3–3.4, up to 99.8%. The extracted Zn2+ was enriched in the organic phase, and the Zn2+ in the organic phase was extracted back into the aqueous phase in the stripping stage by adding strong acid. Addition amounts of strong acid of 50 g·L−1, 80 g·L−1, and 100 g·L−1 were set. The results showed that the addition amounts of 80 g·L−1 and 100 g·L−1 could significantly reduce the pH of the back-extraction solution and effectively enrich Zn2+ in the solution. There was a large amount of Zn2+ in the back-extraction solution, which could be used twice to prepare zinc carbonate products through neutralization and precipitation. By comparing the extraction effect, economic cost, and resource loss under different strong acid addition amounts, it was found that the 80 g·L−1 strong acid addition amount was more suitable for the actual production process. This study provides data support and practical evidence for the selection of industrial extraction process parameters for Zn2+ separation in actual cobalt products.Keywords
Funding Information
- National Key Research and Development Program of China (2020YFC1909704)
This publication has 29 references indexed in Scilit:
- Extraction of zinc from spent pickle liquor using primary amine extraction systemHydrometallurgy, 2023
- Process monitoring of cobalt carbonate precipitation by reactions between cobalt sulfate and sodium carbonate solutions to control product morphology and purityHydrometallurgy, 2023
- Combination of low-accumulation kumquat cultivars and amendments to reduce Cd and Pb accumulation in kumquat grown in contaminated soilJournal of Cleaner Production, 2022
- A review of circular economy strategies for mine tailingsCleaner Engineering and Technology, 2022
- Selective extraction and separation of metal values from leach liquor of mixed spent Li-ion batteriesJournal of the Taiwan Institute of Chemical Engineers, 2015
- Preparation of new polysulfone capsules containing Cyanex 272 and their properties for Co(II) removal from aqueous solutionJournal of Environmental Chemical Engineering, 2015
- Mine tailings dams: Characteristics, failure, environmental impacts, and remediationApplied Geochemistry, 2014
- Micro-spherical CoCO3 anode for lithium-ion batteriesMaterials Letters, 2014
- Study of ceramic pigments based on cobalt doped Y2O3–Al2O3 systemJournal of Thermal Analysis and Calorimetry, 2014
- Recovery of cobalt sulfate from spent lithium ion batteries by reductive leaching and solvent extraction with Cyanex 272Hydrometallurgy, 2010