XMXiaofei Meng

Xiaofei Meng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaofei Meng has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Migration Behavior of Sulfur, Manganese, and Zinc During Electric Furnace Smelting of Nickel–Cobalt Enrichments

    by Xiaoping Zou, Haibei Wang, Xiaobing Zhang, Xiaofei Meng, Haitai Zhou

    During the reductive smelting of nickel–cobalt hydroxide enrichments, the migration behavior of typical impurities has a direct impact on the quality of crude nickel and the subsequent electrorefining process. In this study, pre-reduced calcine derived from laterite nickel–cobalt hydroxide enrichments was used as feed material, and semi-industrial smelting tests were carried out in a 40 kVA single-phase electric arc furnace. The migration and distribution behaviors of typical elements, including Ni, S, Mn, and Zn, were systematically investigated. The results show that under the conditions of pre-reduction at 900 °C and electric furnace smelting at 1550 °C, nickel is efficiently reduced, yielding crude nickel with a grade exceeding 80% and a nickel recovery of approximately 95%. During smelting, the sulfur was mainly distributed between the crude nickel and the flue gas, dust, and furnace retention, with only 1.26–1.38% of the sulfur in the charge entering the slag phase. The sulfur content in crude nickel increases with the degree of reduction, reaching a maximum of 14.84%. Manganese is mainly enriched in the slag; under moderate reducing conditions, the manganese content in crude nickel can be kept below 0.2%, while that in the slag is about 9.91%. Zinc exhibits a high volatilization rate of over 90% during reductive smelting, and by controlling an appropriate reduction depth, crude nickel with a zinc content lower than 0.1% can be obtained. Phase analysis indicates that the crude nickel is mainly composed of a nickel-based alloy phase and a hexagonal nickel sulfide (Ni3S2) phase, whereas the slag is predominantly composed of a manganese–magnesium olivine phase and a glass phase. This study elucidates the migration behavior of typical impurities during the electric furnace smelting of nickel–cobalt enrichments, providing a theoretical basis for optimizing the reductive smelting process parameters and controlling the quality of crude nickel.

  • Open Access

    Selective Preferential Separation and Extraction of Rhodium: A Review

    by Haitao Zhou, Zhizhuo Yang, Xiaofei Meng, Xiaoping Zou, Yingping Jiang, Kun Huang

    Due to its extensive industrial applications and high market prices, as well as low mining yield, the recovery of rhodium from various secondary resources is becoming increasingly urgent for addressing its supply issues. Generally, rhodium is extracted last from the leaching solutions containing other platinum group metals and base metals. The lengthy processing flow led to the inevitable yield loss of rhodium. Compared to the conventional extraction process, selective preferential separation and extraction of rhodium are of great significance for achieving its high economic value and efficient recovery. However, selective preferential separation and extraction of rhodium have to face many difficulties, such as its kinetically inert properties, being prone to hydration and hydrolysis reactions, etc. This paper reviews various promising improvements and new technologies for selective preferential separation and extraction of rhodium from mixed metal solutions, including precipitation, liquid–liquid extraction, adsorption and other emerging technologies. The advantages and disadvantages of those reported technologies were evaluated. It is pointed out that the selective preferential adsorption of rhodium based on molecular recognition and ion imprinting is a promising rhodium recovery technology, which is economical and consistent with the concept of green chemistry.


  • Open Access

    Selective Recovery Lithium from Mother Liquor via Solvent Extraction: A Review on Extractants, Mechanisms, and Efficiency

    by Xiaofei Meng, Xiaoping Zou, Yingping Jiang, Haitao Zhou, Jiantao Zhao, Shengmei Zhang, Junqi Zhang

    With the rapid expansion of the global lithium battery industry, the demand for lithium as a critical raw material continues to grow. Lithium precipitation mother liquor still contains considerable concentrations of lithium ions (Li+), but they generally exhibit a high sodium-to-lithium ratio, which makes the separation of lithium from sodium particularly challenging. Solvent extraction is recognized as a viable approach for challenging Li+/Na+ separation due to its high selectivity, operational flexibility, and scalability. A comprehensive assessment and comparison of various extraction systems are therefore essential to facilitate the sustainable recovery of lithium from precipitation mother liquor. This review summarizes the commonly used extraction systems, including organophosphorus extractants, ketone-based extractants, macrocyclic compounds, ionic liquids, and deep eutectic solvents. A systematic analysis is provided regarding their extraction mechanisms, applicable conditions, and respective advantages and disadvantages. Finally, perspectives and suggestions are offered on future research directions and improvement strategies for different extraction systems, along with an outlook on the potential of combined enhancement technologies.


  • Open Access

    Closed-Loop Process of Extracting and Separating Zinc Impurities from Industrial Cobalt Products—Pilot Test Study

    by Xiaoping Zou, Xiaofei Meng, Yingping Jiang, Xulong Dong, Shili Li

    The cobalt-containing products of an enterprise were selected as the object of this study. The separation effect of Cyanex 272 on Zn and Co was studied through a pilot test. The results showed that Cyanex 272 had a high extraction rate for Zn at pH 3–3.4, up to 99.8%. The extracted Zn2+ was enriched in the organic phase, and the Zn2+ in the organic phase was extracted back into the aqueous phase in the stripping stage by adding strong acid. Addition amounts of strong acid of 50 g·L−1, 80 g·L−1, and 100 g·L−1 were set. The results showed that the addition amounts of 80 g·L−1 and 100 g·L−1 could significantly reduce the pH of the back-extraction solution and effectively enrich Zn2+ in the solution. There was a large amount of Zn2+ in the back-extraction solution, which could be used twice to prepare zinc carbonate products through neutralization and precipitation. By comparing the extraction effect, economic cost, and resource loss under different strong acid addition amounts, it was found that the 80 g·L−1 strong acid addition amount was more suitable for the actual production process. This study provides data support and practical evidence for the selection of industrial extraction process parameters for Zn2+ separation in actual cobalt products.