Accelerated Testing of PEI-Silica Sorbent Pellets for Direct Air Capture
Open Access
- 6 November 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (46) , 45970-45982
Abstract
Amine-based sorbents have shown exceptional CO2 uptake for direct air capture (DAC). However, amine degradation is a major issue for this class of materials, hindering their deployment for large-scale DAC. In this study, a comprehensive evaluation of polyethylenimine (PEI) sorbents was conducted to understand their degradation under process-relevant environments for the DAC of CO2. A solvent-minimized silica-supported PEI-sorbent powder synthesis method using centrifugal mixing was developed. Unlike traditional solvent-assisted impregnated sorbent synthesis methods, the centrifugal mixing method enabled a 94% reduction in volatile and toxic organic solvent use in pelletized sorbent synthesis. The pelletized sorbents exhibited CO2 adsorption capacities consistent with traditional fabrication methods for PEI-based solid sorbents (about 1 mmol/g). The pelletized sorbent degradation behavior was evaluated at three different regeneration temperatures (80, 100, and 120 °C) under nitrogen (N2), ambient air (21% O2), and saturated dry and wet (75% relative humidity (RH)) CO2 environments using fixed-bed breakthrough (BT) experiments. Additionally, accelerated testing (AT) protocols that mimic industrial DAC conditions were developed to assess the long-term stability of the PEI-silica pellets. Our results indicate that the sorbent degrades rapidly (ca. 94% within 24 h) at 120 °C in ambient air (21% O2), demonstrating the detrimental impact of oxygen when compared to an O2-free environment. AT performed for 100 h (equivalent to 33, 100, and 100 cycles) continuously at 80, 100, and 120 °C reveals that dry CO2-induced degradation of the PEI-silica sorbent pellets is 30-40% and 40-50% more than the degradation measured in wet CO2 and inert (pure N2) environments.Keywords
Funding Information
- Los Alamos National Laboratory (20230065DR)
This publication has 39 references indexed in Scilit:
- Sorbents for the Direct Capture of CO2 from Ambient AirAngewandte Chemie International Edition, 2020
- Oxidation-stable amine-containing adsorbents for carbon dioxide captureNature Communications, 2018
- 3D-Printed Metal–Organic Framework Monoliths for Gas Adsorption ProcessesACS Applied Materials & Interfaces, 2017
- Formulation of Aminosilica Adsorbents into 3D-Printed Monoliths and Evaluation of Their CO2 Capture PerformanceACS Applied Materials & Interfaces, 2017
- 3D-Printed Zeolite Monoliths for CO2 Removal from Enclosed EnvironmentsACS Applied Materials & Interfaces, 2016
- Direct Capture of CO2 from Ambient AirChemical Reviews, 2016
- Poly(ethylenimine)‐Functionalized Monolithic Alumina Honeycomb Adsorbents for CO2 Capture from AirChemSusChem, 2016
- Role of Additives in Composite PEI/Oxide CO2 Adsorbents: Enhancement in the Amine Efficiency of Supported PEI by PEG in CO2 Capture from Simulated Ambient AirACS Applied Materials & Interfaces, 2015
- Economic and energetic analysis of capturing CO 2 from ambient airProceedings of the National Academy of Sciences, 2011
- Stabilization of Amine-Containing CO2 Adsorbents: Dramatic Effect of Water VaporJournal of the American Chemical Society, 2010