High Melt Strength Polypropylene via Reactive Extrusion for Injection-Molded Foams: Performance of Virgin and Recycled Blends
Open Access
- 25 May 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (22) , 32290-32309
Abstract
This research demonstrates an eco-friendly and reproducible method to synthesize high melt strength polypropylene (HMSPP) by reactive extrusion of virgin polypropylene (PP) and recycled polypropylene (rPP) blends with low-density polyethylene (LDPE). In contrast to many previous reactive extrusion studies that primarily focused on low-MFR polypropylene grades for extrusion or thermoforming-based processes, the present study targets high-MFR-HMSPP materials suitable for injection molding applications, particularly injection-molded foams. A peroxide initiator (DHBP) and a polyfunctional coagent, namely trimethylolpropane triacrylate (TMPTA), were added to the blends to induce long-chain branching (LCB) while maintaining adequate processability. Detailed analyses were conducted to evaluate the effects of LDPE (20–40 wt %) and TMPTA (2–5 wt %) on morphology, thermal behavior, rheological response, mechanical performance, and foaming characteristics. Rheological investigations revealed pronounced increases in complex viscosity, storage modulus, and melt elasticity, accompanied by strain-hardening behavior in TMPTA-modified blends, which are widely accepted rheological signatures of long-chain branching rather than extensive gel formation. SEM analyses demonstrated improved interfacial compatibility among reactively modified blends and refined LDPE domain structures following reactive modification. The recycled blend (rPP5) displayed similar foamability, indicating the potential capability of the procedure to upcycle waste PP.Keywords
Funding Information
- Ravago Petrochemicals T?rkiye
This publication has 79 references indexed in Scilit:
- A continuous melt extrusion approach toward polyethylene‐based vitrimers with improved crosslinking and performanceJournal of Applied Polymer Science, 2024
- Preparation Process Orthogonal Optimization and Mechanical Properties of Microcellular Foam PolypropyleneMacromolecular Materials and Engineering, 2021
- A strategy for the preparation of closed‐cell and crosslinked polypropylene foam by supercritical CO2 foamingJournal of Applied Polymer Science, 2017
- The Influence of Blend Ratio on the Morphology, Mechanical, Thermal, and Rheological Properties of PP/LDPE BlendsMacromolecular Materials and Engineering, 2016
- Preparation and characterization of high melt strength polypropylene with long chain branched structure by the reactive extrusion processJournal of Applied Polymer Science, 2011
- Mechanical properties and thermal analysis of low‐density polyethylene + polypropylene blends with dialkyl peroxidePolymers for Advanced Technologies, 2009
- Rheology and thermal properties of polypropylene modified by reactive extrusion with dicumyl peroxide and trimethylol propane triacrylateAdvances in Polymer Technology, 2009
- Effect of long‐chain branches of polypropylene on rheological properties and foam‐extrusion performancesJournal of Applied Polymer Science, 2005
- LDPE/PP blends modified by peroxide and radiation induced reactionsJournal of Applied Polymer Science, 1994
- Cross‐Linking of polypropylene by peroxide and multifunctional monomer during reactive extrusionAdvances in Polymer Technology, 1993