Structure–Chemistry–Tribology Coupling and Artificial-Intelligence-Assisted Performance Prediction of Cubic Boron Nitride-Reinforced Heat-Polymerized PMMA Denture Base Composites
Open Access
Abstract
Heat-polymerized poly(methyl methacrylate) (PMMA) is widely used for denture bases but remains susceptible to surface deformation and sliding wear. This study evaluated the structure, chemistry, surface morphology, microhardness, and dry-sliding tribology of PMMA reinforced with 1, 3, and 5 wt.% cubic boron nitride (c-BN). Disk specimens (10 mm diameter × 2 mm thickness) were prepared; ten specimens per group were tested for Vickers microhardness and wear/coefficient of friction, while one representative specimen per group was examined by XRD, ATR-FTIR, and SEM/EDS before and after wear. The PMMA amorphous/semi-amorphous response and characteristic ester bands were retained, whereas c-BN-related diffraction features and B/N signals became more evident with reinforcement. Microhardness increased from 20.00 ± 0.70 to 45.00 ± 1.61 HV0.03. After 1000 m at 10 N and 1 m s−1, mass loss decreased from 32.4 to 9.8 mg and the overall coefficient of friction from 0.58 to 0.28. Post-wear SEM/EDS showed reduced grooving, smearing, and material detachment at higher c-BN contents. Statistical analysis confirmed large composition effects, and composition-window models reproduced the measured hardness and wear trends. Within the tested range, 5 wt.% c-BN provided the strongest surface-hardening and wear-suppression response under controlled dry-sliding conditions.Keywords
Funding Information
- Fırat University Scientific Research Projects Coordination Unit (DHF.26.05)
This publication has 55 references indexed in Scilit:
- Tribological and anti-corrosion performance of epoxy resin composite coatings reinforced with differently sized cubic boron nitride (CBN) particlesFriction, 2020
- Performing elemental microanalysis with high accuracy and high precision by scanning electron microscopy/silicon drift detector energy-dispersive X-ray spectrometry (SEM/SDD-EDS)Journal of Materials Science, 2014
- Friction and wear behavior of zirconium oxide reinforced PMMA compositesComposites Part B: Engineering, 2014
- Extremely randomized treesMachine Learning, 2006
- A Decision-Theoretic Generalization of On-Line Learning and an Application to BoostingJournal of Computer and System Sciences, 1997
- Support-vector networksMachine Learning, 1995
- The running‐in and steady‐state coefficient of friction of some engineering thermoplasticsPolymer Engineering & Science, 1993
- Structure analysis of the cubic boron nitride crystalsJournal of Physics and Chemistry of Solids, 1990
- Abrasive wear of polymersWear, 1969
- The laser-Raman and infra-red spectra of poly(methyl methacrylate)Polymer, 1969