The Effect of Voltage on Material Removal Rate in the ECM Process
Open Access
- 4 June 2025
- journal article
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 15 (3) , 23680-23685
Abstract
The development of machining processes, such as Electrochemical Machining (ECM), has improved manufacturing complex shapes and complicated materials. This research investigates the enhancement of the ECM process to achieve the highest quality of materials. Specifically, Material Removal Rate (MRR) is utilized as a performance parameter to reduce machining time and increase productivity without influencing product quality. This is accomplished through machining a workpiece made of high-speed steel AISI M2, using a copper tool in a sodium chloride (NaCl) solution. Optimal voltage parameters are determined to address issues, such as surface defects, power consumption, and process instability. The primary goal of this research are to enhance surface quality and ensure precision machining. The experiment includes three parameters, each one at three levels: voltage (10 V, 20 V, and 30 V), electrolyte concentration (20 g/L, 40 g/L, and 60 g/L), and a gap width (0.1 mm, 0.2 mm, and 0.3 mm). The experimental work is carried out on Minitab, a statistical software with a general full factorial design. A mathematical model is developed to create a figure through which is determined how MRR performs with variation of the three experiment parameters. Analysis of variance is performed through the ANOVA test to study the influence of the input parameters. The results indicate that MRR is significantly affected by voltage, followed by electrolyte concentration, while the gap width demonstrated minimal effect. Increasing voltage and electrolyte concentration leads to an increase in MRR. Similarly, increasing the gap width initially leads to a decrease in MRR, which then reaches a plateau. The maximum and minimum MRR values are 0.0871 g/min and 0.0023 g/min, respectively, revealing that voltage is an effective parameter for ECM quality optimization.Keywords
This publication has 28 references indexed in Scilit:
- Hydroxyapatite synthesis and characterization from waste animal bones and natural sources for biomedical applicationsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2024
- Calcium Orthophosphate (CaPO4) Containing Composites for Biomedical Applications: Formulations, Properties, and ApplicationsJournal of Composites Science, 2024
- There Are over 60 Ways to Produce Biocompatible Calcium Orthophosphate (CaPO4) Deposits on Various SubstratesJournal of Composites Science, 2023
- Recent Advances in Hydroxyapatite-Based Biocomposites for Bone Tissue Regeneration in OrthopedicsInternational Journal of Molecular Sciences, 2022
- Tribological and Mechanical Properties of Hybrid nHAp/ SiO2/chitosan Composites Fabricated from Snail Shell Using Grey Rational Grade (GRG) AnalysisSilicon, 2021
- Thermal and mechanical properties of poly(lactic acid) filled with modified silicon dioxide: importance of the surface areaPolymer Bulletin, 2021
- Enhanced mechanical properties and hydrophilic behavior of magnesium oxide added hydroxyapatite nanocomposite: A bone substitute material for load bearing applicationsCeramics International, 2020
- Estimation of crystallite size and lattice strain in nano-sized TiC particle-reinforced 6005A aluminium alloy from X-ray diffraction line broadeningPowder Technology, 2019
- Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical ApplicationsMaterials, 2017
- X-ray analysis of ZnO nanoparticles by Williamson–Hall and size–strain plot methodsSolid State Sciences, 2011