Flexural behavior of RC continuous beams having hybrid reinforcement of steel and GFRP bars
Authors:
- 9 January 2023
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 42 (23-24) , 1289-1302
Abstract
Fiber reinforced polymers (FRP) have been considered to be the alternative material to steel in reinforced concrete structures (RC) with the advantages of corrosion resistance, non-conductivity, and high strength-to-weight ratio. FRP-RC beam is featured with higher deformability and larger crack width. However, there is no recognizable ductility in FRP-RC members. Due to the lack of the ductility of FRP-RC beam, it was suggested using hybrid reinforcement of steel and FRP to achieve a preferable strength and ductility. The flexural behavior of the concrete beams reinforced with hybrid reinforcement was investigated through series of six continuous beams. The positive moment GFRP reinforcement ratios of 0.75% and 1.25% were used and the steel reinforcement ratios were ranged to determine the optimum percentage to work efficiently with GFRP. The experimental results showed that increasing GFRP positive moment reinforcement ratio to be more than 1.4 [ ] increased the flexural capacity of the section but with less ductile behavior. However, increasing the steel positive moment reinforcement ratio leaded to the increase of both the flexural capacity and the ductile behavior in a condition that the steel positive moment reinforcement ratio was [ ]. It was shown that the flexural capacity predication of the hybrid section using the semi brittle elastic material method to present the de-bonding of moment that occurred at the failure stage had a good accuracy with the experimental results.Keywords
This publication has 19 references indexed in Scilit:
- Flexural performance of FRP reinforced concrete beamsComposite Structures, 2012
- Flexural Behavior of Continuous FRP-Reinforced Concrete BeamsJournal of Composites for Construction, 2010
- Experimental study of hybrid FRP reinforced concrete beamsEngineering Structures, 2010
- Moment Redistribution in Continuous Steel-Concrete Composite Beams with Compact Cross SectionJournal of Structural Engineering, 2010
- Flexural Behavior of Continuous GFRP Reinforced Concrete BeamsJournal of Composites for Construction, 2008
- Moment redistribution effects in beamsMagazine of Concrete Research, 2005
- Structural Performances of Concrete Beams with Hybrid (Fiber-Reinforced Polymer-Steel) ReinforcementsJournal of Composites for Construction, 2002
- Load-Deflection Analysis of FRP Reinforced Concrete Flexural MembersJournal of Composites for Construction, 2000
- Behavior and Ductility of Simple and Continuous FRP Reinforced BeamsJournal of Composites for Construction, 1998
- REDISTRIBUTION OF DESIGN BENDING MOMENTS IN REINFORCED CONCRETE CONTINUOUS BEAMS.Proceedings of the Institution of Civil Engineers, 1959