Randa Fouad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Randa Fouad has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
Amr Zaher
Ain Shams University
2 shared publicationsHadad Said
Housing and Building National Research Center (HBRC)
2 shared publicationsAyman Aboubeah
Ain Shams University
1 shared publicationAyman Hussain
Ain Shams University
1 shared publicationAyman Hussein
Faculty of Engineering Ain Shams University, Cairo, Egypt
1 shared publicationAyman S Aboubeah
Faculty of Engineering Ain Shams University, Cairo, Egypt
1 shared publication
Latest Publications
- 1 June 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (11) , 115112
Assessing the impact of modulus of elasticity of fiber reinforced polymer in hybrid reinforcement of continuous reinforced concrete beams
Researchers and industrial professionals are increasingly interested in fiber-reinforced polymer (FRP) as an alternative to steel bars in reinforced concrete (RC) structures. This trend is driven by the material’s notable advantages, including high tensile strength, corrosion resistance, electrical non-conductivity, and low self-weight. The present study investigates the relationship between ductility and moment redistribution in two-span RC beams reinforced with FRP bars of different modulus of elasticity. It also examines the influence of the reinforcement ratio between negative and positive moment regions, or the reserve strength in positive moments. Both experimental testing and finite element analysis using ANSYS were conducted to evaluate the effects of FRP modulus and reinforcement distribution in hybrid sections. The results demonstrate that desirable moment redistribution levels can be achieved through an appropriate balance between steel and FRP reinforcement. Unlike several previous studies, the findings highlight that the dominant factor enabling significant redistribution in hybrid beams is not solely reserve strength, but also the modulus of elasticity of FRP. A suitable modulus allows steel reinforcement to yield in both negative and positive regions, enhancing redistribution and maintaining acceptable ductility. Thus, hybrid reinforcement systems can achieve both structural performance and durability benefits.
- 1 June 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (11) , 115112
Assessing the impact of modulus of elasticity of fiber reinforced polymer in hybrid reinforcement of continuous reinforced concrete beams
Researchers and industrial professionals are increasingly interested in fiber-reinforced polymer (FRP) as an alternative to steel bars in reinforced concrete (RC) structures. This trend is driven by the material’s notable advantages, including high tensile strength, corrosion resistance, electrical non-conductivity, and low self-weight. The present study investigates the relationship between ductility and moment redistribution in two-span RC beams reinforced with FRP bars of different modulus of elasticity. It also examines the influence of the reinforcement ratio between negative and positive moment regions, or the reserve strength in positive moments. Both experimental testing and finite element analysis using ANSYS were conducted to evaluate the effects of FRP modulus and reinforcement distribution in hybrid sections. The results demonstrate that desirable moment redistribution levels can be achieved through an appropriate balance between steel and FRP reinforcement. Unlike several previous studies, the findings highlight that the dominant factor enabling significant redistribution in hybrid beams is not solely reserve strength, but also the modulus of elasticity of FRP. A suitable modulus allows steel reinforcement to yield in both negative and positive regions, enhancing redistribution and maintaining acceptable ductility. Thus, hybrid reinforcement systems can achieve both structural performance and durability benefits.
- 14 January 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Investigation of flexural behaviour and environmental benefits of PET reinforced concrete slabs
This study investigates the structural behavior and flexural performance of concrete slabs incorporating recycled polyethylene terephthalate (PET) at dosages of 200 kg/m 3 and 300 kg/m 3 as a partial replacement for fine aggregate in the mixture. Eight slab specimens were cast and tested, including normal concrete (NC), PET-modified concrete, and reinforced concrete slabs, with thicknesses of 10 cm and 15 cm. The experimental program involved flexural load testing to determine the first crack load, ultimate failure load, deflection, and crack patterns. The results revealed that increasing PET content improved ductility and first crack resistance, with the PET (300 kg/m 3 ) slabs exhibiting the highest deflection capacity and more distributed, narrower cracks compared to normal concrete. Although PET addition reduced compressive strength, especially at higher dosages, it enhanced flexural toughness. Reinforced concrete slabs demonstrated the highest load-bearing capacity and deflection, confirming their superior structural performance. The study highlights that PET inclusion can contribute positively to crack control and sustainability by recycling plastic waste into structural elements. Incorporating recycled PET into concrete not only enhances structural performance but also supports environmental sustainability by reducing plastic waste, conserving natural resources, and lowering the environmental footprint of construction. Overall, PET-modified concrete presents a viable, eco-friendly solution for improving the flexural behavior of slabs, particularly in applications with limited or no reinforcement.
- 14 January 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Investigation of flexural behaviour and environmental benefits of PET reinforced concrete slabs
This study investigates the structural behavior and flexural performance of concrete slabs incorporating recycled polyethylene terephthalate (PET) at dosages of 200 kg/m 3 and 300 kg/m 3 as a partial replacement for fine aggregate in the mixture. Eight slab specimens were cast and tested, including normal concrete (NC), PET-modified concrete, and reinforced concrete slabs, with thicknesses of 10 cm and 15 cm. The experimental program involved flexural load testing to determine the first crack load, ultimate failure load, deflection, and crack patterns. The results revealed that increasing PET content improved ductility and first crack resistance, with the PET (300 kg/m 3 ) slabs exhibiting the highest deflection capacity and more distributed, narrower cracks compared to normal concrete. Although PET addition reduced compressive strength, especially at higher dosages, it enhanced flexural toughness. Reinforced concrete slabs demonstrated the highest load-bearing capacity and deflection, confirming their superior structural performance. The study highlights that PET inclusion can contribute positively to crack control and sustainability by recycling plastic waste into structural elements. Incorporating recycled PET into concrete not only enhances structural performance but also supports environmental sustainability by reducing plastic waste, conserving natural resources, and lowering the environmental footprint of construction. Overall, PET-modified concrete presents a viable, eco-friendly solution for improving the flexural behavior of slabs, particularly in applications with limited or no reinforcement.
- 8 July 2025
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 45 (13-14) , 3273-3296
Evaluation of strength-to-cost ratios for steel, FRP, and hybrid reinforcements in reinforced concrete beams
This study investigates the strength-to-cost efficiency of reinforced concrete (RC) beams utilizing steel, fiber reinforced polymer (FRP), and hybrid reinforcement sections. Combining finite element analysis with experimental validation, the research evaluates both structural performance and economic feasibility, incorporating initial investment and long-term maintenance costs. While steel reinforcement demonstrates the highest initial strength-to-cost ratio (4.25 kN/$), it is susceptible to corrosion-related maintenance. FRP, although more expensive upfront, offers superior durability and minimal maintenance, yielding a lower ratio (3.10 kN/$) but improved lifecycle performance. Hybrid systems, incorporating both materials, achieve a balanced ratio of 3.80 kN/$ and demonstrate up to 20% enhanced durability compared to steel-only systems. Monte Carlo simulations are employed to model cost uncertainties and failure loads, providing a comprehensive probabilistic assessment. The findings underscore the importance of considering both short-term and lifecycle costs in the selection of RC beam reinforcement, with hybrid systems emerging as an effective compromise between performance and cost efficiency.
- 8 July 2025
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 45 (13-14) , 3273-3296
Evaluation of strength-to-cost ratios for steel, FRP, and hybrid reinforcements in reinforced concrete beams
This study investigates the strength-to-cost efficiency of reinforced concrete (RC) beams utilizing steel, fiber reinforced polymer (FRP), and hybrid reinforcement sections. Combining finite element analysis with experimental validation, the research evaluates both structural performance and economic feasibility, incorporating initial investment and long-term maintenance costs. While steel reinforcement demonstrates the highest initial strength-to-cost ratio (4.25 kN/$), it is susceptible to corrosion-related maintenance. FRP, although more expensive upfront, offers superior durability and minimal maintenance, yielding a lower ratio (3.10 kN/$) but improved lifecycle performance. Hybrid systems, incorporating both materials, achieve a balanced ratio of 3.80 kN/$ and demonstrate up to 20% enhanced durability compared to steel-only systems. Monte Carlo simulations are employed to model cost uncertainties and failure loads, providing a comprehensive probabilistic assessment. The findings underscore the importance of considering both short-term and lifecycle costs in the selection of RC beam reinforcement, with hybrid systems emerging as an effective compromise between performance and cost efficiency.
- 9 January 2023
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 42 (23-24) , 1289-1302
Flexural behavior of RC continuous beams having hybrid reinforcement of steel and GFRP bars
Fiber reinforced polymers (FRP) have been considered to be the alternative material to steel in reinforced concrete structures (RC) with the advantages of corrosion resistance, non-conductivity, and high strength-to-weight ratio. FRP-RC beam is featured with higher deformability and larger crack width. However, there is no recognizable ductility in FRP-RC members. Due to the lack of the ductility of FRP-RC beam, it was suggested using hybrid reinforcement of steel and FRP to achieve a preferable strength and ductility. The flexural behavior of the concrete beams reinforced with hybrid reinforcement was investigated through series of six continuous beams. The positive moment GFRP reinforcement ratios of 0.75% and 1.25% were used and the steel reinforcement ratios were ranged to determine the optimum percentage to work efficiently with GFRP. The experimental results showed that increasing GFRP positive moment reinforcement ratio to be more than 1.4 [ ] increased the flexural capacity of the section but with less ductile behavior. However, increasing the steel positive moment reinforcement ratio leaded to the increase of both the flexural capacity and the ductile behavior in a condition that the steel positive moment reinforcement ratio was [ ]. It was shown that the flexural capacity predication of the hybrid section using the semi brittle elastic material method to present the de-bonding of moment that occurred at the failure stage had a good accuracy with the experimental results.
- 9 January 2023
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 42 (23-24) , 1289-1302
Flexural behavior of RC continuous beams having hybrid reinforcement of steel and GFRP bars
Fiber reinforced polymers (FRP) have been considered to be the alternative material to steel in reinforced concrete structures (RC) with the advantages of corrosion resistance, non-conductivity, and high strength-to-weight ratio. FRP-RC beam is featured with higher deformability and larger crack width. However, there is no recognizable ductility in FRP-RC members. Due to the lack of the ductility of FRP-RC beam, it was suggested using hybrid reinforcement of steel and FRP to achieve a preferable strength and ductility. The flexural behavior of the concrete beams reinforced with hybrid reinforcement was investigated through series of six continuous beams. The positive moment GFRP reinforcement ratios of 0.75% and 1.25% were used and the steel reinforcement ratios were ranged to determine the optimum percentage to work efficiently with GFRP. The experimental results showed that increasing GFRP positive moment reinforcement ratio to be more than 1.4 [ ] increased the flexural capacity of the section but with less ductile behavior. However, increasing the steel positive moment reinforcement ratio leaded to the increase of both the flexural capacity and the ductile behavior in a condition that the steel positive moment reinforcement ratio was [ ]. It was shown that the flexural capacity predication of the hybrid section using the semi brittle elastic material method to present the de-bonding of moment that occurred at the failure stage had a good accuracy with the experimental results.