Effect of annealing temperatures on the turn‐on voltage of organic Schottky diode based on DPP(BTFu) 2
Open Access
- 1 November 2016
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 11 (11) , 734-737
Abstract
The electrical properties of diketopyrrolopyrrole ethyl‐hexylated (DPP(TBFu) 2 ) thin film sandwich structure of the ITO/DPP(TBFu) 2 /Al configuration for different annealing temperatures ranging from 40 to 130°C is investigated. The current–voltage characteristics showed an excellent rectifying behaviour of the device, and from which the diode parameters were extracted. It is found that all parameters remain constant upon annealing temperatures, with the exception of the turn‐on voltage. An increase of the turn‐on voltage from an initial value of 1.6–2.08 V is noticed starting from 70 to 100°C, respectively. This fact is attributed to the effect of residual solvent induced defect states that may act as free carriers. Defect states density for the non‐annealed and annealed device at 130°C derived from capacitance–voltage measurements is found to correlate well with the turn‐on voltage. It is found that annealing the device at 130°C results in a smaller concentration of defect states. In addition, it is also found that the annealing process produces the flat band voltage drop, which has a direct impact on the turn‐on voltage.Keywords
This publication has 23 references indexed in Scilit:
- Effect of post-fabrication thermal annealing on Fermi-level pinning phenomenon in metal-pentacene junctionsOrganic Electronics, 2012
- Compensating Poly(3‐hexylthiophene) Reveals Its Doping Density and Its Strong Exciton Quenching by Free CarriersAdvanced Materials, 2012
- Sensitivity of the Mott–Schottky Analysis in Organic Solar CellsThe Journal of Physical Chemistry C, 2012
- Capacitance-voltage characteristics of organic Schottky diode with and without deep trapsApplied Physics Letters, 2011
- Effect of Charge Recombination on the Fill Factor of Small Molecule Bulk Heterojunction Solar CellsAdvanced Energy Materials, 2011
- Electrical characterization of the organic semiconductor Ag/CuPc/Au Schottky diodeJournal of Semiconductors, 2011
- Fabrication and electrical characteristics of Schottky diode based on organic materialMicroelectronic Engineering, 2008
- Relation between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cellsChemical Physics Letters, 2006
- Fabrication and characteristics of Schottky diode based on composite organic semiconductorsComposites Science and Technology, 2005
- Characteristics of Schottky barrier solar cells using polyacetylene, (CH)xSynthetic Metals, 1982