Detection of loose fasteners in a third rail support assembly using a wavelet analysis
- 26 February 2014
- journal article
- research article
- Published by Taylor & Francis in The IES Journal Part A: Civil & Structural Engineering
- Vol. 7 (2) , 73-82
Abstract
The function of the third rail is to supply power in a mass rapid transit system through a semi-continuous rigid conductor placed alongside the rails of a railway track. Although it is fully segregated and fixed along the floating slab tracks (FSTs), which is used to insulate the surrounding buildings from vibration of the passing trains, the FSTs and the third rail are still prone to reverberation. Precisely because of this reason, many of the fasteners used to tighten the claw to the insulator eventually become loose, dislodging the claw holding the third rail and causing part of it to sag. This, in turn, can damage the collector shoes and causing the trains to lose power. Hence, the root of the problem is due to loose fastener in the third rail system. In this study, the dynamic response of a vehicle–rail interaction system is analysed, and the results show that the natural frequency of the interactive system decreases as a vehicle passes through a loose support. Based on this fact, a detection algorithm based on wavelet analysis is proposed. Numerical verification for different cases is produced and analysed, and the results show that it is plausible to use the proposed method in practice to detect loose fastener in a third rail support.Keywords
This publication has 12 references indexed in Scilit:
- Continuous wavelet analysis of mode shapes differences for damage detectionMechanical Systems and Signal Processing, 2013
- A wavelet-based damage detection algorithm based on bridge acceleration response to a vehicleMechanical Systems and Signal Processing, 2012
- An Efficient Image-Based Method for Detection of Fastener on RailwayAdvanced Materials Research, 2011
- An Efficient Direction Field-Based Method for the Detection of Fasteners on High-Speed RailwaysSensors, 2011
- Fastener Damage Estimation in a Square Aluminum PlateStructural Health Monitoring, 2006
- Detection of bolt loosening in C–C composite thermal protection panels: II. Experimental verificationSmart Materials and Structures, 2006
- Detection of bolt loosening in C–C composite thermal protection panels: I. Diagnostic principleSmart Materials and Structures, 2006
- Using chaotic interrogation and attractor nonlinear cross-prediction error to detect fastener preload loss in an aluminum frameChaos: An Interdisciplinary Journal of Nonlinear Science, 2004
- STRUCTURAL HEALTH MONITORING OF AN AIRCRAFT JOINTMechanical Systems and Signal Processing, 2003
- Wavelet-Based Approach for Structural Damage DetectionJournal of Engineering Mechanics, 2000