Experimental investigation into pressure oscillations in the compression chamber of a rotary compressor
Authors:
- Chuntai ZhengCZChuntai Zheng
- Keke GaoKGKeke Gao
- Wei ZhaoWZWei Zhao
- Hongjun CaoHCHongjun Cao
- Benshuai LyuBLBenshuai Lyu
- Lei ZhongLZLei Zhong
- Yi GaoYGYi Gao
- Ren LiaoRLRen Liao
- Liang ShiLSLiang Shi
- 1 December 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (12)
Abstract
This study experimentally investigates the characteristics of the pressure oscillations within the compression chamber of a rotary compressor and evaluates their impact on compressor performance. Four fast-response pressure transducers are installed at circumferential positions in the upper cylinder to measure instantaneous pressure under varying rotational speeds (60–120 Hz) and suction pressures (0.4–1.0 MPa). Results reveal significant pressure oscillations during compression, with amplitudes increasing at higher rotational speeds. The oscillation frequency ranges from below 1000 Hz at the start of compression to approximately 4000 Hz near discharge. A finite element study is conducted to calculate the natural frequencies of the compression chamber assuming the shape at an instantaneous shaft angle. The calculated frequencies are identical to those observed in the experiments. It is revealed that the physical mechanisms of the pressure oscillations are the quasi-static acoustic resonance within the crescent-shaped chamber. Rapid volume changes with fast roller motions are identified as key triggers for the resonance. Performance tests demonstrate a decline in the coefficient of performance (COP) with increasing speed. The study highlights that acoustic resonance-induced pressure oscillations critically degrade energy efficiency, particularly at elevated rotational speeds. Mitigating these oscillations is essential for optimizing compressor performance at high speeds.Keywords
Funding Information
- National Natural Science Foundation of China (12472263)
This publication has 21 references indexed in Scilit:
- Performance analysis for a rotary compressor at high speed: Experimental study and mathematical modelingApplied Thermal Engineering, 2024
- Investigation of discharge valve in ultra-high-speed rotary compressors: An experimental and FSI simulation-based studyInternational Journal of Refrigeration, 2024
- Performance research and improvement of ultra-high-speed R290 rotary compressorInternational Journal of Refrigeration, 2024
- Investigations on efficiency improvement of rolling piston type rotary compressor with a new-designed cylinderApplied Thermal Engineering, 2022
- Investigation on noise of rotary compressors using fluid-structure interactionJournal of Mechanical Science and Technology, 2019
- Dynamic characteristics of rolling piston machines2019
- Experimental performance evaluation on leakage characteristics of R32 in rolling piston type rotary compressorInternational Journal of Refrigeration, 2018
- Simulation and comparison of leakage characteristics of R290 in rolling piston type rotary compressorInternational Journal of Refrigeration, 2015
- Synchrosqueezed wavelet transforms: An empirical mode decomposition-like toolApplied and Computational Harmonic Analysis, 2011
- Dynamic compression and weak shock formation in an inert gas due to fast piston accelerationJournal of Fluid Mechanics, 1990