Iodine Capture with Copper-Electroplated Nickel Foams
- 31 July 2026
- journal article
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (31) , 16669-16684
Abstract
This work explores the use of Ni0 foam scaffolds for Cu0 coatings for use as sorbents for iodine. The Cu0 electroplating was performed from aqueous copper(II) sulfate (CuSO4) solutions under different conditions to achieve a range of Cu0-layer thicknesses (4.89 ± 1.05 μm–57.32 ± 3.95 μm) with 900 A·m–2 current densities and coating times of 15–180 min. The thickest coatings resulted in Cu0-plated Ni0 foams with >89 mass % Cu0 in the final product. Iodine capture experiments showed very high Cu0 utilizations of 91.9–97.3 mass % at iodine loadings of 839–1774 mg·g–1 through the formation of CuI (marshite; space group F-43m). No evidence was found of iodine reactions taking place with the Ni0 scaffold, so it remained in iodine-loaded Cu-electroplated Ni foams as structural support to provide mechanical rigidity to the foams during the iodine loading process. Hot pressing of these materials can be used to create a CuI/Ni ceramic-metal composite waste form for disposal as demonstrated with spark plasma sintering.Keywords
Funding Information
- Advanced Research Projects Agency - Energy
- U.S. Department of Energy (DEAR0001615)
This publication has 46 references indexed in Scilit:
- The effect of unintended porosity on the first compressive stress maximum of alumina hollow sphere-filled bimodal composite metal foamsHeliyon, 2024
- In-situ SEM investigation on the damage behavior of an interpenetrating metal ceramic compositeComposite Structures, 2023
- Capture of aqueous radioiodine species by metallated adsorbents from wastestreams of the nuclear power industry: a reviewSN Applied Sciences, 2021
- Comprehensive comparison of bismuth and silver functionalized nickel foam composites in capturing radioactive gaseous iodineJournal of Hazardous Materials, 2021
- The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless platingAdvanced Powder Technology, 2021
- Bismuth-based materials for iodine capture and storage: A reviewJournal of Environmental Chemical Engineering, 2021
- Materials and processes for the effective capture and immobilization of radioiodine: A reviewJournal of Nuclear Materials, 2016
- Bismuth-embedded SBA-15 mesoporous silica for radioactive iodine capture and stable storageJournal of Nuclear Materials, 2015
- Via Technologies for MEMS2010
- Electrodeposition2008