SSSaurabh Kumar Sharma

Saurabh Kumar Sharma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Saurabh Kumar Sharma has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nanohybrid of Cu2O–Ti3C2T x as a Silver-Free MXene Sorbent for Iodine Gas Capture from Nuclear Waste

    by Karamullah Eisawi, Emerson Broomfield, Katherine R. Johnson, Matthew C. Vick, Saurabh Kumar Sharma, J. Matthew Kurley, Joanna McFarlane, Kyle S. Brinkman, Jie Lian, Brian J. Riley, et al.

    The capture of volatile radioiodine from nuclear fuel reprocessing off-gas streams remains a critical challenge due to the high volatility, long half-life, and biological uptake of 129I from the environment. Although silver-based sorbents provide strong iodine chemisorption, their high cost and regulatory classification as mixed radioactive-hazardous waste motivate the development of alternative materials. Here, we report a silver-free Cu2O–Ti3C2Tx MXene hybrid for iodine gas capture at 150 °C. Structural and compositional analyses confirm the formation of Cu2O nanoparticles on Ti3C2Tx nanosheets and their subsequent conversion to thermodynamically stable CuI upon static iodine gas exposure. The nanohybrid achieves an iodine mass loading of up to 1115 mg/g. The iodine-loaded hybrid was further consolidated by spark plasma sintering into a mechanically self-supporting CuI–Ti3C2Tx monolith that retained the CuI phase and exhibited a seven-day cumulative normalized iodine loss of 1.64 g/m2, corresponding to only 0.076% of the initial iodine inventory during modified ASTM C1308–21 leach testing. These results demonstrate the potential of Cu2O–Ti3C2Tx MXene as a copper-based alternative to silver sorbents for elevated-temperature iodine gas capture.

  • Iodine Capture with Copper-Electroplated Nickel Foams

    by Brian J. Riley, Harmony S. Werth, Steven Livers, Katherine R. Johnson, Brodie Barth, Miroslava Peterson, Ercan Cakmak, Chase Cobble, Martin Liezers, Nathan L. Canfield, et al.

    This work explores the use of Ni0 foam scaffolds for Cu0 coatings for use as sorbents for iodine. The Cu0 electroplating was performed from aqueous copper(II) sulfate (CuSO4) solutions under different conditions to achieve a range of Cu0-layer thicknesses (4.89 ± 1.05 μm–57.32 ± 3.95 μm) with 900 A·m–2 current densities and coating times of 15–180 min. The thickest coatings resulted in Cu0-plated Ni0 foams with >89 mass % Cu0 in the final product. Iodine capture experiments showed very high Cu0 utilizations of 91.9–97.3 mass % at iodine loadings of 839–1774 mg·g–1 through the formation of CuI (marshite; space group F-43m). No evidence was found of iodine reactions taking place with the Ni0 scaffold, so it remained in iodine-loaded Cu-electroplated Ni foams as structural support to provide mechanical rigidity to the foams during the iodine loading process. Hot pressing of these materials can be used to create a CuI/Ni ceramic-metal composite waste form for disposal as demonstrated with spark plasma sintering.

  • Open Access

    A low temperature solution-chemical process for fluoride salt (NaF) waste immobilization into metal halide perovskite structured Na 2 SnF 6

    by Saurabh Kumar Sharma, Dong Zhao, Weiguang Zhu, Kun Yang, Mingyang Zhao, Jie Lian

    Complex salt waste streams generated from chemical reprocessing of spent nuclear fuels and advanced molten salt reactor technologies require innovative materials and processes for effective immobilization and management. In this study, we report a simple, low-temperature, solution-based approach for immobilizing fluoride salts, specifically alkali halides, into metal halide perovskite (MHP) waste forms. Using NaF as a representative system, systematic experiments were conducted to immobilize alkali-halides into Na2SnF6, achieving a high fluorine content of 40.9 wt% and a fluoride loading capacity of 57.4 wt%. By tailoring key parameters such as the use of surfactants, salt grain size, and reaction temperature, the low temperature solution chemistry process achieves consistently high immobilization efficiencies above 95%. X-Ray diffraction (XRD) analysis coupled with Rietveld refinement confirmed that Na2SnF6 predominantly crystallizes in the tetragonal P42/mnm structure as the primary phase. A hexagonal metastable phase was also observed, attributed to rapid precipitation during synthesis. Microstructural characterization using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) confirms uniform elemental distribution and microchemical compositions consistent with the Na2SnF6 crystal structure. Thermogravimetric analysis (TGA) demonstrates thermal stability of the synthesized waste forms up to 400 °C. This work establishes a foundational, cost-effective pathway for immobilizing alkali fluoride salt waste into MHP-type structures with high waste loading using novel low-temperature solution chemistry for effective management of salt waste.

  • Open Access

    Spectroscopic insights into structural and electronic modifications in Ce0.8Zr0.2O2 under low-energy ion irradiation

    by Vivek Kumar, Yogendar Singh, Avaneesh Pandey, Saurabh Kumar Sharma, Rajendra Kumar Sharma, Vinita Grover, P. K. Kulriya

    This study presents a comprehensive spectroscopic investigation of defect formation and structural stability in polycrystalline Ce0.8Zr0.2O2 subjected to 1.75 MeV Xe5+ ion irradiation up to a fluence of 1 × 1017 ions/cm2. Building on our earlier structural analysis of Xe-induced defects in Ce0.8Zr0.2O2, we employ Raman spectroscopy, synchrotron-based x-ray photoelectron spectroscopy (XPS), UV–visible diffuse reflectance spectroscopy (UV–Vis DRS), and photoluminescence (PL) to elucidate atomic-scale structural and electronic modifications. Raman analysis reveals the emergence of Ce3+ and oxygen-vacancy-induced distortions, evident from peak broadening and shifts associated with B1g, F2g, and LO phonon modes. The extent of structural disorder is quantified from Raman intensity ratios and FWHM broadening, revealing damage region diameters of ∼0.31 ± 0.03 and ∼0.22 ± 0.03 nm, respectively. XPS confirms the partial reduction of Ce4+ to Ce3+ and Zr4+ to Zr3+, along with oxygen-vacancy formation that contributes to lattice relaxation and stabilization of the fluorite structure. UV–Vis DRS measurements show a decrease in optical bandgap from 3.37 to 2.71 eV and an increase in Urbach energy from 1.09 to 2.33 eV, indicating enhanced electronic disorder. PL intensity is quenched upon irradiation due to increased non-radiative recombination through defect centers. These findings provide a coherent spectroscopic framework to understand irradiation-driven redox and defect processes in Ce0.8Zr0.2O2. Its retained crystallinity while accommodating high defect densities highlights its promise as a radiation-tolerant matrix for advanced nuclear and extreme-environment applications.

  • Pelletization with Spark Plasma Sintering and Characterization of Metal Iodides: An Assessment of Long-Term Radioiodine Immobilization Options

    by Jared M. Oshiro, Alessandra Lie Fujii Yamagata, Saurabh Kumar Sharma, R. Matthew Asmussen, Saehwa Chong, Brian J. Riley, Jarrod V. Crum, Joshua A. Silverstein, Nathan L. Canfield, Jie Lian


  • Open Access

    Swift Au+9 ion irradiation-induced defects and alloy complexity effect on the mechanical hardness of NiCoCrFePd HEA and NiCoCrFe MEA

    by Abid Hussain, S. A. Khan, Saurabh K. Sharma, Chetan Singh, Abhishek Rastogi, P. K. Kulriya

    The outstanding radiation damage stability of an NiCoCrFePd high entropy alloy (HEA) as compared to conventional alloys poses the question for the mechanism of an ion–matter interaction. The positron annihilation lifetime spectroscopic and TEM (transmission electron microscopic) measurements are implemented to trace different kinds of defects produced by 120 MeV Au+9 ion irradiation and their evolution as a function of ion fluence. The variation of lifetimes and corresponding intensities with the ion fluence indicates the formation of dislocation-type defects at a lower ion fluence and vacancy clusters at a higher ion fluence caused by coalescence or agglomeration of dislocation defects. Formation of different types of defects in turn modulates the strain development inside the crystal. Additionally, the HR-TEM investigation of NiCoCrFePd HEA also exhibits the formation of dislocation and vacancy clusters with the average size of vacancy clusters increases from ∼2.9 ± 0.1 to ∼3.8 ± 0.1 nm with the increases in the ion fluence. Surprisingly, the average defect cluster size in NiCoCrFePd HEA is suppressed compared to NiCoCrFe MEA, thereby showing the enhanced radiation stability on Pd incorporation due to the high defect recombination caused by reduced thermal conductivity and high lattice distortion. Nano-indentation measurement shows that the radiation hardening behavior of the NiCoCrFePd HEA responded slowly owing to its damage suppression property as compared to the NiCoCrFe MEA. Additionally, softening behavior also appeared at an early fluence in NiCoCrFe MEA compared to the NiCoCrFePd HEA signifying its excellent resistance to defect accumulation.


  • Open Access

    Quantification of 1.75 MeV Xe5+ induced defects in zirconia doped ceria (Ce0.8Zr0.2O2)

    by Vivek Kumar, Saurabh Kumar Sharma, Yogendar Singh, Sanjay Kumar Kedia, R. C. Meena, Vinita Grover, P. K. Kulriya

    This study investigates the structural stability of the CeO2-ZrO2 system when subjected to high doses of irradiation (a few hundred displacements per atom). The goal is to explore their potential use in safe immobilization of spent nuclear fuel and development of accident-tolerant fuels for next-generation nuclear reactors. Highly dense pellets were synthesized using a solid-state reaction and then irradiated with 1.75 MeV Xe5+ ions at ion fluences ranging from 1 × 1015 to 1 × 1017 ions/cm2. Structural and microstructural analyses were conducted using glancing angle x-ray diffraction, micro-Raman spectroscopy, and scanning electron microscopy. The results indicate that Ce0.8Zr0.2O2 has a high tolerance against irradiation-induced phase transformation or amorphization but does generate irradiation-induced point defects. Each energetic ion produced a deformed region with a voluminous swelling of ∼0.61 ± 0.09 nm and a damaged zone of ∼0.09 ± 0.02 nm, as calculated from the irradiation-caused peak broadening that is explained by a three-step damage accumulation model. The electron microscopy studies show that grain boundaries serve as a sink for defects, and an increase in grain size was observed due to defect accumulation inside the grain's volume. Overall, the study shows that polycrystalline fluorite-structured Ce0.8Zr0.2O2 is a promising nuclear material for advanced energy systems as it did not show significant structural damage such as amorphization and grain fragmentation, even on irradiation at a high dose of ∼428 dpa.


  • Study on FT-MIR spectra of ghee (anhydrous milk fat)

    by Bency Antony, Saurabh Sharma, Bhavbhuti Manojbhai Mehta, K. Ratnam, K.D. Aparnathi

    Purpose: Ghee, anhydrous milk fat, is chemically highly complex in nature. The authentication and characterization of edible fats and oils by routine chemical methods are highly laborious and time consuming. Fourier transform-mid-infrared (FT-MIR) spectroscopy has emerged as a predominant analytical tool in the study of edible fats/oils. However, sufficient attention has not been paid so far to spectral characterization of milk fat obtained from cow and buffalo milk. The purpose of this paper is to fill this void. Design/methodology/approach: Ghee samples were prepared from cow and buffalo milk by the direct cream method. From each type of milk (cow and buffalo), 35 samples of ghee were prepared; thus, in total, 70 samples of ghee were obtained for the study. For assigning absorption bands in the IR spectrum, spectra of cow and buffalo ghee samples were acquired in the MIR region (4,000-650 cm−1). Findings: In FT-MIR spectra of ghee, 14 peaks were obtained at different positions and with varying intensities. They were at 3,005, 2,922, 2,853, 1,744, 1,466, 1,418, 1,377, 1,236, 1,161, 1,114, 1,098, 966, 870 and 721 cm−1 for cow and buffalo ghee with almost equal intensity of absorption. Practical implications: The finding of this study will be useful for characterization and authentication of ghee. Originality/value: Application of IR spectral bands of ghee in the MIR region using a FT-infrared spectrometer to monitor the quality of ghee is suggested.