Linearity Enhancement in Magnetostrictive Sensors Based on Substructure with Tunable Poisson’s Ratio
Open Access
Abstract
Magnetostrictive sensors based on the inverse magnetostrictive effect offer the advantages of wireless passive operation and structural simplicity; however, achieving both high sensitivity and superior linearity remains a persistent challenge. This study presents a magnetostrictive pressure sensor incorporating a tunable Poisson’s ratio (TPR) chiral auxetic honeycomb substructure, designed to linearize the stress response of the sensing material. A theoretical model linking substructure design parameters to sensor output linearity was derived and validated through finite element simulations. The fabricated substructure exhibited a stable negative Poisson’s ratio (−1.278 to −1.213) within its elastic regime and a highly linear axial-to-transverse strain relationship (x = 1.214y + 0.113). The sensor achieved a calibration linearity of R2 = 0.99745, a continuous linear force response up to 118.7 N while the corresponding voltage variation reached 10.75 mV, and a maximum hysteresis error of 5.495% over eight loading cycles. Bearing press-fit force monitoring experiments confirmed practical viability under industrial conditions, with R2 exceeding at least 0.995 for dry assembly between multiple bearing types and maintaining R2 > 0.994 under lubricated conditions. The proposed TPR substructure approach establishes a reference framework for linearity enhancement in inverse magnetostrictive force sensors.Keywords
This publication has 30 references indexed in Scilit:
- A quasi-zero stiffness dual-functional device based on magnet-piezoelectric cantilever beams for vibration isolation and energy harvestingMechanical Systems and Signal Processing, 2026
- Bio-inspired magnetically triggered snap-through mechanism for enhanced mechanical-to-electrical energy conversionChemical Engineering Journal, 2026
- A novel magnetoelastic biosensor consisting of carbon quantum dots/nitrocellulose membranes and NiFe2O4/ polylactic acid based on 3D printing for α2-macroglobulin detectionChinese Journal of Analytical Chemistry, 2024
- Integration of melt electrowritten microfibers with magnetoelastic sensors for continuous monitoring of cell growthSensors & Diagnostics, 2024
- Dynamic characterisation of novel three-dimensional axisymmetric chiral auxetic structureComposite Structures, 2024
- Comprehensive study of magnetostriction-based MEMS magnetic sensor of a FeGa/PZT cantileverSensors and Actuators A: Physical, 2021
- Influence of the magnetic domain structure in the mass sensitivity of magnetoelastic sensors with different geometriesJournal of Alloys and Compounds, 2021
- Magnetostrictive tactile sensor array for force and stiffness detectionJournal of Magnetism and Magnetic Materials, 2020
- Frequency dependence of the magnetostrictive phenomenon in Metglas® 2605SA1 ribbon: A minor-loop caseAIP Advances, 2014
- Effect of surface roughness on magnetic domain wall thickness, domain size, and coercivityJournal of Applied Physics, 2001