Optimization of PLA 3D printing parameters considering cooling rate and hardness
- 1 January 2026
- conference paper
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Session 1_,p. 64-71
Abstract
This paper presents the optimization of 3D printing parameters for polylactide (PLA) using the Taguchi method, aiming to investigate their influence on the cooling rate and Shore A hardness of the samples. During the 3D printing process, printing temperature, printing speed, and layer height were varied across three levels. A thermographic camera was used to measure characteristic temperatures at a point immediately behind the nozzle and after a specific period of time; these measurements were used to determine the cooling rate, which affects layer hardness. Since lower mechanical properties compared to conventional technologies represent one of the main drawbacks of 3D printing, it is essential to thoroughly investigate these properties to determine the functionality of the working parts. Hardness testing of the PLA samples was performed using an analog durometer in accordance with the EN ISO 868:2015 standard.Keywords
This publication has 4 references indexed in Scilit:
- Investigation of the effects of 3D printing parameters on mechanical tests of PLA parts produced by MEX 3D printing using Taguchi methodScientific Reports, 2025
- The Effect of Heat Treatment on a 3D-Printed PLA Polymer’s Mechanical PropertiesPolymers, 2023
- Optimization of 3D printing process parameters for improving hardness of PLA plastic using Taguchi methodAIP Conference Proceedings, 2023
- Optimization of Properties for 3D Printed PLA Material Using Taguchi, ANOVA and Multi-Objective MethodologiesProcedia Structural Integrity, 2021