Aleksandar Rajić
Aleksandar Rajić has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ivan Palinkaš
University of Novi Sad
4 shared publications - Dušan Malić
Technical College of Applied Sciences Zrenjanin Serbia
2 shared publications - Ljubica Lazić-Vulićević2 shared publications
- Spasoje Erić2 shared publications
Danijela M. Jašin
1 shared publication- Dušan Jovanić
Stručni rad strukovnih studija u Zrenjaninu Zrenjanin
1 shared publication
Latest Publications
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Session 1_,p. 64-71
Optimization of PLA 3D printing parameters considering cooling rate and hardness
This paper presents the optimization of 3D printing parameters for polylactide (PLA) using the Taguchi method, aiming to investigate their influence on the cooling rate and Shore A hardness of the samples. During the 3D printing process, printing temperature, printing speed, and layer height were varied across three levels. A thermographic camera was used to measure characteristic temperatures at a point immediately behind the nozzle and after a specific period of time; these measurements were used to determine the cooling rate, which affects layer hardness. Since lower mechanical properties compared to conventional technologies represent one of the main drawbacks of 3D printing, it is essential to thoroughly investigate these properties to determine the functionality of the working parts. Hardness testing of the PLA samples was performed using an analog durometer in accordance with the EN ISO 868:2015 standard.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Session 1_,p. 64-71
Optimization of PLA 3D printing parameters considering cooling rate and hardness
This paper presents the optimization of 3D printing parameters for polylactide (PLA) using the Taguchi method, aiming to investigate their influence on the cooling rate and Shore A hardness of the samples. During the 3D printing process, printing temperature, printing speed, and layer height were varied across three levels. A thermographic camera was used to measure characteristic temperatures at a point immediately behind the nozzle and after a specific period of time; these measurements were used to determine the cooling rate, which affects layer hardness. Since lower mechanical properties compared to conventional technologies represent one of the main drawbacks of 3D printing, it is essential to thoroughly investigate these properties to determine the functionality of the working parts. Hardness testing of the PLA samples was performed using an analog durometer in accordance with the EN ISO 868:2015 standard.
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Part two,p. 69-76
Industry 5.0 in biomedical engineering: Development of personalised implants using additive manufacturing and 3D scanning
This paper examines additive manufacturing technologies in the context of personalised implants within Industry 5.0, with a focus on biomedical engineering. Additive manufacturing enables the production of complex, patient-specific implants directly from digital models. A key component is reverse engineering using 3D scanning, which provides accurate anatomical data for implant design. Industry 5.0 emphasises human-machine collaboration, personalisation, and sustainability, while additive technologies support flexible and efficient production of biocompatible implants. The paper outlines the main advantages, challenges, and future prospects of these technologies in medical applications. It concludes that the integration of additive manufacturing, reverse engineering, biomedical engineering, and Industry 5.0 principles has strong potential to enhance healthcare through innovation and personalised solutions.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Part two,p. 69-76
Open AccessIndustry 5.0 in biomedical engineering: Development of personalised implants using additive manufacturing and 3D scanning
This paper examines additive manufacturing technologies in the context of personalised implants within Industry 5.0, with a focus on biomedical engineering. Additive manufacturing enables the production of complex, patient-specific implants directly from digital models. A key component is reverse engineering using 3D scanning, which provides accurate anatomical data for implant design. Industry 5.0 emphasises human-machine collaboration, personalisation, and sustainability, while additive technologies support flexible and efficient production of biocompatible implants. The paper outlines the main advantages, challenges, and future prospects of these technologies in medical applications. It concludes that the integration of additive manufacturing, reverse engineering, biomedical engineering, and Industry 5.0 principles has strong potential to enhance healthcare through innovation and personalised solutions.
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Part four,p. 452-459
CAD-CAM integration in industry 5.0
This paper analyses modern CAD/CAM systems within the context of Industry 5.0, with a focus on their integration with advanced digital technologies. Industry 5.0 emphasises human-machine collaboration, personalised production, and sustainability, where CAD/CAM tools such as SolidWorks play a key role in optimising design and manufacturing processes. The application of artificial intelligence enables design automation, structural optimisation, and predictive analysis, while augmented and virtual reality enhance visualisation, simulation, and operator training. The integration of these technologies positions CAD/CAM systems as central platforms for industrial digital transformation. In conclusion, the synergy between CAD/CAM systems and Industry 5.0 technologies represents a key factor in improving the efficiency, flexibility, and competitiveness of modern manufacturing systems.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Part four,p. 452-459
Open AccessCAD-CAM integration in industry 5.0
This paper analyses modern CAD/CAM systems within the context of Industry 5.0, with a focus on their integration with advanced digital technologies. Industry 5.0 emphasises human-machine collaboration, personalised production, and sustainability, where CAD/CAM tools such as SolidWorks play a key role in optimising design and manufacturing processes. The application of artificial intelligence enables design automation, structural optimisation, and predictive analysis, while augmented and virtual reality enhance visualisation, simulation, and operator training. The integration of these technologies positions CAD/CAM systems as central platforms for industrial digital transformation. In conclusion, the synergy between CAD/CAM systems and Industry 5.0 technologies represents a key factor in improving the efficiency, flexibility, and competitiveness of modern manufacturing systems.
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Part two,p. 147-154
Application of refrigerant gases and their impact on climate change
Refrigerant gases are widely used today, from refrigeration devices for storage, air conditioning of facilities (from households to industrial facilities) to transport cooling and air conditioning in vehicles. Considering their widespread use, it is necessary to analyze their impact on climate change. Refrigerant gases, their application and impact on GWP (Global warming potential) and ODP (Ozone depletion potential) are presented in this paper. The paper shows the division of refrigerant gases according to their chemical composition and elements that affect the damage to the ozone layer and global warming with the greenhouse effect (GHG Greenhouse gases).
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Part two,p. 147-154
Application of refrigerant gases and their impact on climate change
Refrigerant gases are widely used today, from refrigeration devices for storage, air conditioning of facilities (from households to industrial facilities) to transport cooling and air conditioning in vehicles. Considering their widespread use, it is necessary to analyze their impact on climate change. Refrigerant gases, their application and impact on GWP (Global warming potential) and ODP (Ozone depletion potential) are presented in this paper. The paper shows the division of refrigerant gases according to their chemical composition and elements that affect the damage to the ozone layer and global warming with the greenhouse effect (GHG Greenhouse gases).
- Open Access
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Part two,p. 123-130
Repurposing waste for sustainable energy: A solar collector made from recycled aluminum cans
The increasing demand for sustainable energy solutions has driven the development of innovative methods for harnessing renewable energy. This paper presents the design, construction, and implementation of a cost-effective solar air collector made from recycled aluminum cans. By utilizing readily available, low-cost materials, this system offers an accessible and eco-friendly approach to improving energy efficiency. Its construction requires only basic tools and skills, making it feasible for individuals, households, and small communities to build and install their own solar collectors. This approach not only reduces waste by repurposing aluminum cans but also helps lower heating costs, particularly in colder climates. The system effectively raises air temperature, providing a practical solution for supplemental space heating. The primary goal of this paper is to demonstrate the potential of Do-it-yourself (DIY) solar collectors as an affordable, scalable technology for enhancing energy efficiency while promoting environmental sustainability.
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Part two,p. 123-130
Open AccessRepurposing waste for sustainable energy: A solar collector made from recycled aluminum cans
The increasing demand for sustainable energy solutions has driven the development of innovative methods for harnessing renewable energy. This paper presents the design, construction, and implementation of a cost-effective solar air collector made from recycled aluminum cans. By utilizing readily available, low-cost materials, this system offers an accessible and eco-friendly approach to improving energy efficiency. Its construction requires only basic tools and skills, making it feasible for individuals, households, and small communities to build and install their own solar collectors. This approach not only reduces waste by repurposing aluminum cans but also helps lower heating costs, particularly in colder climates. The system effectively raises air temperature, providing a practical solution for supplemental space heating. The primary goal of this paper is to demonstrate the potential of Do-it-yourself (DIY) solar collectors as an affordable, scalable technology for enhancing energy efficiency while promoting environmental sustainability.
- 30 January 2024
- Published by Springer Nature
- p. 259-268
3D Printing Technology: Materials, Application and Current Trends in Process Improvement
- 30 January 2024
- Published by Springer Nature
- p. 259-268
3D Printing Technology: Materials, Application and Current Trends in Process Improvement
- 1 January 2024
- Published by University Library in Kragujevac
- p. 93-99
THE MECHANICAL PROPERTIES OF A CIRCULAR CROSS-SECTION COLUMN MADE OF COMPOSITE MATERIAL PRODUCED USING A NEW MIXED PLASTIC RECYCLING TECHNOLOGY
This paper presents an advanced recycling technology for materials that are traditionally non-recyclable, such as composite plastics. The resulting material exhibits favorable mechanical properties and serves as a sustainable alternative to wood, metal, and various plastic products. The production process and application of this eco-material are fully aligned with environmental standards. Laboratory tests were conducted to evaluate the mechanical and other properties of the newly developed materials, alongside a circular cross-section column product manufactured from these materials. The obtained results indicate the potential of this pioneering technology as a sustainable solution for repurposing complex waste mixtures of plastics, composites, and glass.
- 1 January 2024
- Published by University Library in Kragujevac
- p. 93-99
THE MECHANICAL PROPERTIES OF A CIRCULAR CROSS-SECTION COLUMN MADE OF COMPOSITE MATERIAL PRODUCED USING A NEW MIXED PLASTIC RECYCLING TECHNOLOGY
This paper presents an advanced recycling technology for materials that are traditionally non-recyclable, such as composite plastics. The resulting material exhibits favorable mechanical properties and serves as a sustainable alternative to wood, metal, and various plastic products. The production process and application of this eco-material are fully aligned with environmental standards. Laboratory tests were conducted to evaluate the mechanical and other properties of the newly developed materials, alongside a circular cross-section column product manufactured from these materials. The obtained results indicate the potential of this pioneering technology as a sustainable solution for repurposing complex waste mixtures of plastics, composites, and glass.