Repair technique of pre-cracked reinforced concrete (RC) beams with transverse openings strengthened with steel plate under sustained load
- 8 March 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 31 (21) , 2360-2379
Abstract
This paper presents a repairing technique of the steel plate that effectively strengthen RC members, control both the failure modes and the stress distribution around the beam chords and enhance the serviceability of pre-cracked RC beams with openings. Furthermore, to evaluate the usage of a temporary pre-stressed force that was applied on the RC beam so as to close all of the presence shear cracks before the steel plate application. Two un-strengthened control beams, five beams that were pre-cracked before the application of the steel plate, and one beam that was strengthened without pre-cracking were tested. Cracking was first induced, followed by repair using various strengthening technique, and then the beams were tested to failure. The advantages of the shear strengthening of RC beams that were obtained using this technique are based on the closing of all the existing cracks around the openings via epoxy injection. The results show that both the pre-existing damage level and the steel plate strengthening have a significant effect on strengthening effectiveness and failure mode at the ultimate strength. An analytical equation for predicting the shear strength of pre-damaged RC beams with circular openings was then proposed, and the obtained results later compared with those from the tests, results were in accordance.Keywords
This publication has 25 references indexed in Scilit:
- Experimental Study of Moderately Reinforced Concrete Beams Strengthened with Bolted-Side Steel PlatesAdvances in Structural Engineering, 2013
- Nonlinear response of bolt groups under in-plane loadingEngineering Structures, 2007
- Experimental and numerical studies of external steel plate strengthened reinforced concrete coupling beamsEngineering Structures, 2005
- External steel plate systems for the shear strengthening of reinforced concrete beamsEngineering Structures, 2001
- Retrofitting reinforced concrete beams by bolting steel plates to their sides -Part 2: Transverse interaction and rigid plastic designSTRUCTURAL ENGINEERING AND MECHANICS, 2000
- Retrofitting reinforced concrete beams by bolting steel plates to their sides -Part 1: Behaviour and experimentsSTRUCTURAL ENGINEERING AND MECHANICS, 2000
- Shear strengthening of reinforced concrete beams using steel plates bonded on beam web: experiments and analysisConstruction and Building Materials, 2000
- Method to Increase Capacity and Stiffness of Reinforced Concrete BeamsPractice Periodical on Structural Design and Construction, 1999
- External Plate Reinforcement for Concrete BeamsJournal of Structural Engineering, 1998
- Strengthening of shear-damaged RC beams by external bonding of steel platesMagazine of Concrete Research, 1995