Design of Impermeability and Durability for Superhydrophobic Mortar
Authors:
- 25 June 2025
- journal article
- Published by American Chemical Society (ACS) in Langmuir
Abstract
The ubiquitous use of mortar in construction is compromised by its susceptibility to environmental degradation, including water penetration, abrasion, and UV radiation, which significantly reduce its service life. To address these challenges, a new type of superhydrophobic mortar with a water contact angle of 155° and a sliding angle of 8° (SC-4) was fabricated by using the method of propriety hydrophobic modification. The compressive strength (CS) of SC-4 was 29.83 ± 1.2 MPa, and the flexural strength (FS) was 5.47 ± 0.3 MPa at the age of 28 days, showing balanced mechanical properties. Compared to the ordinary mortar (OC) group, SC-4 maintained competitive interfacial wettability. Notably, despite 25% lower compressive strength than the benchmark, SC-4 exhibited enhanced structural stability through optimized integration. Leaching tests validated its outstanding impermeability with significantly reduced cumulative water and NaCl absorption. After 200 abrasion cycles, it maintained superhydrophobicity and minimal mechanical property variation, while UV aging tests showed only marginal strength degradation, confirming robust resistance to environmental stressors. This study highlights SC-4's superior impermeability and durability, offering a practical solution for mortar applications.Keywords
This publication has 47 references indexed in Scilit:
- Facile fabrication of flexible superhydrophobic surfaces with high durability and good mechanical strength through embedding silica nanoparticle into polymer substrate by spraying methodColloids and Surfaces A: Physicochemical and Engineering Aspects, 2023
- The preparation of cotton fabric with super‐hydrophobicity and antibacterial properties by the modification of the stearic acidJournal of Applied Polymer Science, 2021
- Mechanically stable superhydrophobic surface on cement-based materialsChemical Physics, 2020
- Effect of PDMS on the waterproofing performance and corrosion resistance of cement mortarApplied Surface Science, 2020
- Digital Concrete: A ReviewCement and Concrete Research, 2019
- Corrosion behavior of steel rebar embedded in hybrid CNTs-OH/polyvinyl alcohol modified concrete under accelerated chloride attackCement and Concrete Composites, 2019
- Influence of sulfate ion and associated cation type on steel reinforcement corrosion in concrete powder aqueous solution in the presence of chloride ionsCement and Concrete Research, 2017
- Comparison between surface and bulk hydrophobic treatment against corrosion of galvanized reinforcing steel in concreteCement and Concrete Research, 2011
- Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments: The role of cracksCement and Concrete Composites, 2010
- Reinforced Concrete Structures1975